1-1/2 Inch x 1 Inch
Underground Storage Tank Equipment
Narrow Your Results
Mfr / Trade Name
Category - Main
Caps & Adapters
Containment Sumps, Monitoring Wells & Flex Connectors
Valves, Drop Tubes & Vents
Accessory
Type
Composition
Size
Fuel Type
Length
Color
- List View
- Gallery View
| Page of 2 |
3 Inch Orange CARB EVR Vapor Recovery Adapter Cap ( E85 Approved)
Item No. 1711T-7085-EVR
For use with 1611AV 61VSA 1611AVB and 1611VR Adapters
3 Inch Orange Flat Top Cap Vapor Recovery Low Profile
Item No. 0613VC-30
Cam action handle
4 Inch X 2-1/2 Inch Tall Riser Pipe Extension Short
Item No. 1002S-40
For use on all Adapters
3 Inch Cap Vapor Recovery Low Profile (E85 Approved)
Item No. 1711LPC-0300
When engaged the locking cap adds only 1/2 inch to the final height of Adapter
3 Inch Full Port Two-Way Ball Valve
Item No. 21BV-0300
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
1-1/2 Inch Female NPT x 1 Inch Shorty Offset Adapter
Item No. 303-1510
Compensates for misalignment of dispenser suction stub and dispenser boxes.
3 Inch Slip-On Adapter For Series 523 Vents
Item No. 523SA-1003
Converts a 523V and 623V ent to a 3 inch slip on vent
3 Inch X 5 Inch Ball Float Vent Valve
Item No. 53VML-3050
Ball bloat vent valves protrude into underground storage tanks from extractor fittings at the Stage I vapor return riser pipe or tank vent line during a product delivery as the tank level rises a counterweight stainless steel ball seats on the valve body and restricts flow of vapors back to the transport truck
3 Inch X 8 Inch Ball Float Vent Valve
Item No. 53VML-3080
Ball bloat vent valves protrude into underground storage tanks from extractor fittings at the Stage I vapor return riser pipe or tank vent line during a product delivery as the tank level rises a counterweight stainless steel ball seats on the valve body and restricts flow of vapors back to the transport truck
3 Inch X 3 Inch Bronze Fill Pipe Adapter
Item No. 633T-8060
Threads onto the 3 Inch fill pipe of underground storage tanks to mate with top-seal delivery 3 inch elbow
3 Inch Duratuff Single Lever Action Top-Seal Cap
Item No. 634TE-7085
Single lever action top seal cap is designed to mate with 3 inch OPW 633T top seal Adapters
3 Inch Carb EVR Certified Pressure Vacuum Vent, 3 Inch Water Column Pressure, 8 Inch Water Column Vacuum, Thread On
Item No. 723V-3203
Factory preset and tested settings
3 Inch Bronze Fill Adapter Cap
Item No. 724-3040
Threads onto the fill pipe by means of internal wrenching lugs. Compatible with Universal 731 and 733 caps. Compatible with E-85
Riser Extension 4 Inch NPT X 4 Inch Diameter X 2-1/2 Inch Installed Height
Item No. A0031-250
Designed to compensate for height variances due to tank settling and heaving
3 Inch x 18 Inch Stainless Steel FLEX-ING Flex Connector With 3 Inch Nickel-Plated Steel Non-Hex Male x 3 Inch Stainless Steel EZ-FIT Hex Female Ends
Item No. FF30X18MXEZF
Flexible connector features stainless steel corrugated fuel contact layers enclosed with high-grade stainless steel braid for aboveground and belowground applications.
3 Inch Open Vent Upward Aluminum
Item No. 23-0055
Installed on the top of vent pipes from underground or aboveground fuel storage tanks always open to the atmosphere to allow any pressure or vacuum in the tank to vent
3 Inch Thread-On 2-1/2 Inch To 6 Inch Water Column Pressure Vacuum Vent
Item No. 623V-3203
Pressure Vacuum Vents are installed on the top of vent pipes from underground or above ground fuel storage tanks
4 Inch Evr Approved Vapor Recovery Cap
Item No. 323C-0100ACEVR
EVR approved all aluminum construction and orange powder coating
3 Inch Swing Check Valve - Threaded Brass
Item No. 246A-0400AV
Designed to prevent backflow in horizontal piping systems. Swing check valve allow liquid to flow in a single direction
Replacement 3 Inch Nitrile Gasket For 1711T Vapor Recovery Cap
Item No. H10886M
Replacement gasket for 1711T-7085-EVR cap
