Brass
Underground Storage Tank Equipment
Narrow Your Results
Mfr / Trade Name
Category - Main
Manholes & Spill Containers
Caps & Adapters
Containment Sumps, Monitoring Wells & Flex Connectors
Submersible Pumps, Motors & Leak Detectors
Valves, Drop Tubes & Vents
Accessory
Type
Composition
Size
Skirt Length
Length
Gallon Size
Color
- List View
- Gallery View
Page of 3 |
4 Inch Grey EVR Duratuff Top-Seal Fill Cap (E85 Approved)
Item No. 634TT-7085-EVR
Tight fill top seal cap is installed on top seal Adapters
3 Inch CARB EVR Orange Vapor Recovery Adapter Cap ( E85 Approved)
Item No. 1711T-7085-EVR
For use with 1611AV 61VSA 1611AVB and 1611VR Adapters
2 Inch Angle Check Valve - Single Poppet Spring Loaded
Item No. 137-0300AV
Fitted with a light spring & soft seat made for standard check valve applications
1-1/2 Inch Full Port Two-Way Ball Valve
Item No. 21BV-0150
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
2 Inch Full Port 2-Way Brass Ball Valve
Item No. 21BV-0200
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
3 Inch Full Port Two-Way Ball Valve
Item No. 21BV-0300
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
4 Inch Brass Top Seal Tight Fill Adapter With Lugs
Item No. 305L-0200AA
EVR Approved used for fill ports and access to leak detection on fuel storage tanks
3/4 Inch Single Poppet Foot Valve
Item No. 334-0100AV
Installed at the inlet of a suction line bottom of the storage tank
1 Inch Single Poppet Foot Valve
Item No. 334-0200AV
Installed at the inlet of a suction line bottom of the storage tank
1-1/2 Inch Single Poppet Foot Valve
Item No. 334-0300AV
Installed at the inlet of a suction line bottom of the storage tank
2 Inch Single Poppet Foot Valve
Item No. 334-0400AV
Installed at the inlet of a suction line bottom of the storage tank
1-1/2 Inch Double Poppet Foot Valve
Item No. 335A-0100AV
Installed at the inlet of a suction line normally at the bottom of the storage tank as a prime holding valve.
2 Inch Double Poppet Foot Valve
Item No. 335A-0200AV
Installed at the inlet of a suction line normally at the bottom of the storage tank as a prime holding valve.
4 Inch NPT Male x 4 Inch x 0.188 Inch Black Steel Submersible Pump Riser Pipe Nipple
Item No. 404RISER
0.188 wall thickness to accommodate submersible pump installation.
4 Inch NPT Male x 5 Inch x 0.188 Inch Black Steel Submersible Pump Riser Pipe Nipple
Item No. 405RISER
0.188 wall thickness to accommodate submersible pump installation.
4 Inch NPT Male x 6 Inch x 0.188 Inch Black Steel Submersible Pump Riser Pipe Nipple
Item No. 406RISER
0.188 wall thickness to accommodate submersible pump installation.
4 Inch NPT Male x 7 Inch x 0.188 Inch Black Steel Submersible Pump Riser Pipe Nipple
Item No. 407RISER
0.188 wall thickness to accommodate submersible pump installation.
4 Inch NPT Male x 9 Inch x 0.188 Inch Black Steel Submersible Pump Riser Pipe Nipple
Item No. 409RISER
0.188 wall thickness to accommodate submersible pump installation.
4 Inch NPT Male x 10 Inch x 0.188 Inch Black Steel Submersible Pump Riser Pipe Nipple
Item No. 410RISER
0.188 wall thickness to accommodate submersible pump installation.
4 Inch NPT Male x 11 Inch x 0.188 Inch Black Steel Submersible Pump Riser Pipe Nipple
Item No. 411RISER
0.188 wall thickness to accommodate submersible pump installation.
4 Inch NPT Male x 12 Inch x 0.188 Inch Black Steel Submersible Pump Riser Pipe Nipple
Item No. 412RISER
0.188 wall thickness to accommodate submersible pump installation.
4 Inch NPT Male x 13 Inch x 0.188 Inch Black Steel Submersible Pump Riser Pipe Nipple
Item No. 413RISER
0.188 wall thickness to accommodate submersible pump installation.