Brass
Underground Storage Tank Equipment
Narrow Your Results
Mfr / Trade Name
Category - Main
Manholes & Spill Containers
Valves, Drop Tubes & Vents
Accessory
Type
Composition
Size
Gallon Size
- List View
- Gallery View
| Page of 2 |
2 Inch Angle Check Valve - Single Poppet Spring Loaded
Item No. 137-0300AV
Fitted with a light spring & soft seat made for standard check valve applications
2 Inch Full Port 2-Way Brass Ball Valve
Item No. 21BV-0200
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
3 Inch Full Port Two-Way Ball Valve
Item No. 21BV-0300
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
4 Inch Brass Top Seal Tight Fill Adapter With Lugs
Item No. 305L-0200AA
EVR Approved used for fill ports and access to leak detection on fuel storage tanks
3/4 Inch Single Poppet Foot Valve
Item No. 334-0100AV
Installed at the inlet of a suction line bottom of the storage tank
1 Inch Single Poppet Foot Valve
Item No. 334-0200AV
Installed at the inlet of a suction line bottom of the storage tank
1-1/2 Inch Single Poppet Foot Valve
Item No. 334-0300AV
Installed at the inlet of a suction line bottom of the storage tank
2 Inch Single Poppet Foot Valve
Item No. 334-0400AV
Installed at the inlet of a suction line bottom of the storage tank
1-1/2 Inch Double Poppet Foot Valve
Item No. 335A-0100AV
Installed at the inlet of a suction line normally at the bottom of the storage tank as a prime holding valve.
2 Inch Double Poppet Foot Valve
Item No. 335A-0200AV
Installed at the inlet of a suction line normally at the bottom of the storage tank as a prime holding valve.
4 Inch Extractor Pipe Cap - Brass
Item No. 578-0100AC
Used as a cover for the extractor / float vent valve overfill system
Fill Adapter - Brass - Lugs 4 Inch Npsm X 4 Inch Cam & Groove
Item No. A0030-024
Designed for use with conventional or dual point fill systems
4 Inch Fill Swivel Adapter - Brass
Item No. SWF-100-B
Protects against fuel spills in the event of a piping break
4 Inch Vapor Swivel Adapter - Brass
Item No. SWV-101-B
Prevents vapor leaks at fill adapter due to loosening from riser during tank filling
4 Inch Tight Fill Adapter Top Seal Without Lugs - Brass
Item No. 305-0200AA
Obsolete Top seal Adapters thread onto underground and aboveground storage tank fill ports and riser pipes where tight fill connections are required
Brass Screw-On EZ-Gage For Doublewall Spill Containment Interstitial
Item No. A1004-001GAGE
Brass screw-on style for use on 5 and 15 gallon double wall spill containment manholes in place of a dipstick
1-1/2 Inch Full Port Two-Way Ball Valve
Item No. 21BV-0150
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
4 Inch Cam And Groove x 4 Inch Female NPSM Brass Top-Seal Fill Swivel Adapter
Item No. A0030-124S
The Model A0030-124S Swivel Fill Adapter typically installs on the tank fill riser of a Dual-Point Phase I Vapor Recovery system for underground fuel storage tanks. The top of the adapter rotates 360 degrees in either direction during routine fuel deliveries. The base of the adapter is stationary preventing accidental loosening from the tank fill riser thread connection while eliminating potential vapor leaks and damage to the drop tube. The adapter is designed for use with Top-Seal type fill caps.
4 Inch Cam And Groove x 4 Inch Female NPSM Brass Top-Seal Vapor Swivel Adapter
Item No. A0076-124S
The Model A0076-124S Vapor Swivel Adapter typically installs on the tank vapor riser of a Dual-Point Phase I Vapor Recovery system for underground fuel storage tanks. The top of the adapter rotates 360 degrees in either direction during routine fuel deliveries. The base of the adapter is stationary preventing accidental loosening from the tank fill riser thread connection while eliminating potential vapor leaks. The adapter is designed for use with Top-Seal vapor caps.
