1-1/2 Inch
Underground Storage Tank Equipment
Narrow Your Results
Mfr / Trade Name
Category - Main
Manholes & Spill Containers
Containment Sumps, Monitoring Wells & Flex Connectors
Valves, Drop Tubes & Vents
Accessory
Enviromental & Safety
Type
Composition
Fuel Type
Length
Gallon Size
Inlet
Application
- List View
- Gallery View
| Page of 2 |
5 Gallon Product Vapor Spill Container Manhole Slip On With Plug
Item No. 1-2105
Aluminum cover & designed to accommodate the fuels of the future including methanol and ethanol
3-1/2 Inch Id X 30 Inch Long Flex Containment Boot
Item No. 1001
Clamped directly to 3 inch secondary pipe used over 2 inch primary pipe
15 Gallon Below Grade Spill Containment Manhole With Duratuff Ii Base - Composite Cover - Slip On
Item No. 101BG-2115
Vapor-tight lid Watertight
1-1/2 Inch Female NPT Low Profile Replacement Shear Top For Double-Poppet 10BFP-5726 Valve
Item No. 10FTP-5701
Female National Pipe Thread (NPT) top connection
1-1/2 Inch Female NPT Replacement Shear Top For Single-Poppet 10BF-5725 Valve
Item No. 10RFT-5750
Replacement top for 10BF-5725
1-1/2 Inch Male NPT Replacement Shear Top For Single-Poppet 10BM-5825 Valve
Item No. 10RMT-5850
1-1/2 Inch Male NPT Replacement Shear Top For Double-Poppet 10RMTP-5851 Valve
Item No. 10RMTP-5851
Replacement top for 10BHMCP-5830
2-3/4 Inch Wide x 10 Inch Long 8 Ounce Capacity Bacon Bomb Fuel Sampler (4849)
Item No. 14209A-EA
Used to obtain samples from storage tanks tank cars and drums. Made of brass and bronze and constructed with a heavy nickel plating and is anti-magnetic.
5 Gallon Vapor/Spill Containment Manhole Duratuff Base With Cast Iron Cover Slip On With Plug
Item No. 1C-2105
Retro-fit 5 gallon spill containment
5 Gallon Slip-On Spill Containment Manhole With Sealable Cast Aluminum Cover
Item No. 1SC-2105
Designed to prevent product from entering the soil near the fill riser or vapor riser connection on underground storage tanks during normal tank filling or in the event of an overfill
1 1/2 Inch Buna Union Check Valve With Screen
Item No. 200AS-15
Easily inserted onto existing union fittings in suction systems
1-1/2 Inch Full Port Two-Way Ball Valve
Item No. 21BV-0150
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
1-1/2 Inch Open Vent Upward Aluminum
Item No. 23-0044
Installed on the top of vent pipes from underground or aboveground fuel storage tanks always open to the atmosphere to allow any pressure or vacuum in the tank to vent
1-1/2 Inch Swing Check Valve - Threaded Brass
Item No. 246A-0100AV
Designed to prevent backflow in horizontal piping systems. Swing check valve allow liquid to flow in a single direction
1-1/2 Inch Single Poppet Foot Valve
Item No. 334-0300AV
Installed at the inlet of a suction line bottom of the storage tank
1-1/2 Inch Double Poppet Foot Valve
Item No. 335A-0100AV
Installed at the inlet of a suction line normally at the bottom of the storage tank as a prime holding valve.
1-1/2 Inch Full Port Stainless Steel Locking Ball Valve
Item No. 691BSS-07001V
Full port valve is used for liquid or air service handling with manual open / close in quick quarter-turn handle operartion
1-1/2 Inch Vertical Check Valve With Shear Groove (E85)
Item No. 70-0070
OPW Vertical Check Valves are installed the inlet to the pump in the dispenser island to maintain prime
