1-1/2 Inch
Underground Storage Tank Equipment
Narrow Your Results
Mfr / Trade Name
Category - Main
Hanging Hardware
Containment Sumps, Monitoring Wells & Flex Connectors
Valves, Drop Tubes & Vents
Accessory
Type
Composition
Size
Fuel Type
Length
Inlet
Color
- List View
- Gallery View
| Page of 2 |
1-1/2 Inch Female NPT Low Profile Replacement Shear Top For Double-Poppet 10BFP-5726 Valve
Item No. 10FTP-5701
Female National Pipe Thread (NPT) top connection
1-1/2 Inch Female NPT Replacement Shear Top For Single-Poppet 10BF-5725 Valve
Item No. 10RFT-5750
Replacement top for 10BF-5725
1-1/2 Inch Male NPT Replacement Shear Top For Single-Poppet 10BM-5825 Valve
Item No. 10RMT-5850
1-1/2 Inch Male NPT Replacement Shear Top For Double-Poppet 10RMTP-5851 Valve
Item No. 10RMTP-5851
Replacement top for 10BHMCP-5830
1 1/2 Inch Buna Union Check Valve With Screen
Item No. 200AS-15
Easily inserted onto existing union fittings in suction systems
1-1/2 Inch Full Port Two-Way Ball Valve
Item No. 21BV-0150
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
1-1/2 Inch Open Vent Upward Aluminum
Item No. 23-0044
Installed on the top of vent pipes from underground or aboveground fuel storage tanks always open to the atmosphere to allow any pressure or vacuum in the tank to vent
1-1/2 Inch Swing Check Valve - Threaded Brass
Item No. 246A-0100AV
Designed to prevent backflow in horizontal piping systems. Swing check valve allow liquid to flow in a single direction
1 Inch Single Poppet Foot Valve
Item No. 334-0200AV
Installed at the inlet of a suction line bottom of the storage tank
1-1/2 Inch Single Poppet Foot Valve
Item No. 334-0300AV
Installed at the inlet of a suction line bottom of the storage tank
1-1/2 Inch Double Poppet Foot Valve
Item No. 335A-0100AV
Installed at the inlet of a suction line normally at the bottom of the storage tank as a prime holding valve.
2 Inch Diffuser - Slip-On Aluminum
Item No. 539AS-0200AD
Designed for installation at the bottom end of a drop tube to reduce turbulence and vapor loss during the filling operation
1-1/2 Inch Full Port Stainless Steel Locking Ball Valve
Item No. 691BSS-07001V
Full port valve is used for liquid or air service handling with manual open / close in quick quarter-turn handle operartion
1-1/2 Inch Vertical Check Valve With Shear Groove (E85)
Item No. 70-0070
OPW Vertical Check Valves are installed the inlet to the pump in the dispenser island to maintain prime
1-1/2 Inch Vertical Check Valve With Test Port And Shear Groove Boss Mount (E85)
Item No. 70S-0075
OPW Vertical Check Valves are installed the inlet to the pump in the dispenser island to maintain prime
2 Inch Upward V Vent Polyethylene
Item No. A4103-002
Slip-on style attaches to 1.5 inch-2.0 inch pipe with 3 set screws
1-1/2 Inch x 18 Inch Stainless Steel FLEX-ING Flex Connector With 1-1/2 Inch EZ-FIT Hex Male x 1-1/2 Inch EZ-FIT Hex Male Stainless Steel Ends
Item No. FF15X18EZMXEZM
Flexible connector features stainless steel corrugated fuel contact layers enclosed with high-grade stainless steel braid for aboveground and belowground applications.
1-1/2 Inch x 18 Inch FireShield Stainless Steel Flex Connector With 2 Inch Hex Female x 1-1/2 Inch Male Swivel Stainless Steel Ends
Item No. FSFS180150
Hydroformed stainless steel corrugated tube maintains wall thickness reduces concentrated residual stress and minimizes work hardening.
