Open
1/2 Inch Port
Narrow Your Results
Mfr / Trade Name
Category - Main
Sensor
Caps & Adapters
Valves, Drop Tubes & Vents
Type
Composition
Size
- List View
- Gallery View
| Page of 1 |
1-1/2 Inch Open Vent Upward Aluminum
Item No. 23-0044
Installed on the top of vent pipes from underground or aboveground fuel storage tanks always open to the atmosphere to allow any pressure or vacuum in the tank to vent
4 Inch EVR Approved Tank Monitor Cap With 1/2 Inch Threaded Porthole And Cable Connector
Item No. 305XP-1200ACEVR
Used for fill ports and access to leak detection on fuel storage tanks
2 Inch Aluminum Tank Monitor Cap And Brass Adapter Combination Kit With 1/2 Inch Threaded Port Hole And 1/2 Inch Cable Connector
Item No. 305XPA-2400AK
Tank monitor caps and adaptors are installed on tank monitor riser pipes to keep water and debris out while providing a liquid tight opening for the probe wire to pass through. Features Helps to keep water, dirt, and debris from entering the tank Prevents vapors from escaping Lockable with a padlock Easy to engage push-on Large easy-to-grip pull ring makes it fast and easy to remove
2 Inch Updraft Vent
Item No. 354-0200AV
Open vent design used on underground and above ground tanks
4 Inch Updraft Vent
Item No. 354-0400AV
Open vent design used on under ground and above ground tanks
4 Inch Aluminum Tank Monitor Cap And Adapter 1/2 Inch Grommet
Item No. 62M-0500
The 62M Monitoring Probe & Adapter Kit includes a 4 inch side-sealing Adapter 4 inch side-sealing cap (tapped) and a 1/2 inch wire grommet to secure the cable from an electronic tank gauge probe in the tank riser pipe
2 Inch Upward V Vent Polyethylene
Item No. A4103-002
Slip-on style attaches to 1.5 inch-2.0 inch pipe with 3 set screws
2 Inch Open Vent Upward Aluminum
Item No. 23-0033
Installed on the top of vent pipes from underground or aboveground fuel storage tanks always open to the atmosphere to allow any pressure or vacuum in the tank to vent
3 Inch Open Vent Upward Aluminum
Item No. 23-0055
Installed on the top of vent pipes from underground or aboveground fuel storage tanks always open to the atmosphere to allow any pressure or vacuum in the tank to vent
4 Inch Aluminum Tank Monitor Cap And Brass Adapter Combination Kit With 1/2 Inch Threaded Port Hole And 1/2 Inch Cable Connector
Item No. 305XPA-1200AK
Tank monitor caps and adaptors are installed on tank monitor riser pipes to keep water and debris out while providing a liquid tight opening for the probe wire to pass through. Features Helps to keep water, dirt, and debris from entering the tank Prevents vapors from escaping Lockable with a padlock Easy to engage push-on Large easy-to-grip pull ring makes it fast and easy to remove
Single-Point Single-Float Hydrostatic Interstitial Reservoir Sensor With 12 Foot Cable And Vented Riser Cap Assembly For Brine-Filled Doublewall Tanks
Item No. 794380-301
The Single-Point Hydrostatic Reservoir Sensor accurately detects fluid level change in the reservoir and interstice of a double wall storage tank. The Single-Point has one float and can be used in low groundwater locations. With the Single-Point Hydrostatic Sensor if either an inner or outer leak occurs the brine level decreases and a low-level alarm is triggered. If an inner-wall leak occurs, the brine seeps into the tank triggering a fuel alarm, or if the outer wall leaks, the brine seeps out of the tank interstice triggering a fuel alarm. Key Features Clear plastic housing for visual inspection or float operations Leak in inner or outer wall triggers a low level alarm in low groundwater areas Meets California&rsquos requirement for secondary space monitoring for tanks as required by AB 2481
4 Inch CARB EVR Approved Aluminum Tank Monitor Cap And Brass Adapter Combination Kit With 1/2 Inch Threaded Port Hole
Item No. 305XPA-1100AKEVR
Tank monitor caps and adaptors are installed on tank monitor riser pipes to keep water and debris out while providing a liquid tight opening for the probe wire to pass through. Features Helps to keep water, dirt, and debris from entering the tank Prevents vapors from escaping Lockable with a padlock Easy to engage push-on Large easy-to-grip pull ring makes it fast and easy to remove
3 Inch Updraft Vent Cap
Item No. 354-0300AV
Open vent design used on under ground and above ground tanks
