Remote
O-Ring
Narrow Your Results
Category - Main
Manholes & Spill Containers
Submersible Pumps, Motors & Leak Detectors
Valves, Drop Tubes & Vents
Type
Size
Tank Diameter
- List View
- Gallery View
| Page of 1 |
7-1/2 Inch X 8 Inch X 1/4 Inch O-Ring
Item No. 072-718-1
Repair part for Red Jacket "Standard" submersible turbines
Functional Element O-Ring Kit
Item No. 172-003-5
Compatible with all standard fuels including gasoline with up to 15% ethanol
O-Ring Fluro
Item No. 400333340
Used to seal lowest portion of the discharge manifold assembly
4 inch 61SOR Series Dual-Point Non-Vaportight Remote Fill OPV Overfill Prevention Valve For Up To 8 Foot Diameter Tank
Item No. 61SOR-4000
The OPW 61SO Overfill Prevention Valve is a 2-Stage Shut-off Valve designed to prevent the overfill of Underground Storage Tanks by providing a positive shut-off of product delivery. When the liquid level rises to about 95 Percent of tank capacity, the valve automatically slows flow. If the delivery is not stopped and liquid rises to about 98 Percent of tank capacity, the valve closes completely and liquid cannot flow.
4 inch 61SOR Series Dual-Point Remote Fill OPV Overfill Prevention Valve For Up To 8 Foot Diameter Tank
Item No. 61SOR-400C
The OPW 61SO Overfill Prevention Valve is a 2-Stage Shut-off Valve designed to prevent the overfill of Underground Storage Tanks by providing a positive shut-off of product delivery. When the liquid level rises to about 95 Percent of tank capacity, the valve automatically slows flow. If the delivery is not stopped and liquid rises to about 98 Percent of tank capacity, the valve closes completely and liquid cannot flow.
500 Series Spill Bucket And Mounting Ring Gasket
Item No. C05170M
Replacement for 700L series secondary containment manholes
33 Inch Fiberglass (Frp) Cover With (2) 5-Gallon Water Shroud Boots And Clamps
Item No. MPWS-33
Designed to completely isolate surface water and condensation from tank sump
33 Inch Testable Water Shroud System
Item No. MPWS-33TS
- Features an injection molded fiberglass water shroud lid that mates to a standard tank sump top hat reducer
36 Inch FRP Fiberglass Cover With (2) 5-Gallon Water Shroud Boots And Clamps
Item No. MPWS-36
Designed to completely isolate surface water and condensation from tank sump
36 Inch Testable Water Shroud System
Item No. MPWS-36TS
Designed to completely isolate surface water and condensation from tank sump
Ovation/Igem Programming Remote Control
Item No. WM002290
Used to program Ovation/iGEM dispenser
4 inch Submersible Turbine Pump Replacement O-Ring Kit
Item No. 410154-001
Complete set of O-rings for 4 inch Red Jacket submersible turbine pump and variable speed replacement part
