Piusi USA
Master Lock
Narrow Your Results
Mfr / Trade Name
Category - Main
Fiberglass
Accessory
Type
Size
Length
Inlet
Color
- List View
- Gallery View
| Page of 4 |
Filler For 8014 Adhesive
Item No. 002990-004-0
Thickening agent to increase viscosity of 8069 Adhesive.
PSX-20 Adhesive Filler Kit
Item No. 002990-033-0
Thickening agent to increase viscosity of PSX Adhesive.
3 Inch X 26-30 Foot Length Tapered Ends Smith Pipe (Order In Multiples Of 30 Foot)
Item No. 011030-069-3
UL971 listed and also available in 2 inch and 4 inch
3 Inch X 22-25 Foot Length Plain End Secondary Pipe (Order In Multiples Of 25 Foot)
Item No. 011030-069-5
UL971 listed and also available in 2 inch and 4 inch
3 Inch x 26-30 Foot Length Plain End Secondary Pipe (Order In Multiples Of 30 Foot)
Item No. 011030-069-6
UL971 listed and also available in 2 inch and 4 inch
6 Inch X 22-25 Foot Length Secondary Containment Smith Pipe (Order In Length Of 25 Foot)
Item No. 011060-120-4
Rated at 20 psig @ 150 degrees Fahrenheit
3 Inch X 2 Inch Reducer Bushing Scarfed O.D. X Taper I.D.
Item No. 012030-231-7
UL 971 listed
3 Inch Crossover 45 Degree (2 Piece)
Item No. 012030-311-3
UL971 listed and also available in 4 inch
4 Inch X 3 Inch Concentric Reducer (2 Piece)
Item No. 012040-238-3
UL971 listed and also available in 5 inch x 4 inch
4 Inch Primary 90 Degree Elbow
Item No. 012040-360-4
UL 971 listed and also available in 2 inch and 3 inch
4 Inch Bonded Sump Entry Termination Fitting
Item No. 012040-626-0
UL971 listed and also available in 3 inch
5 Inch X 4 Inch Concentric Reducer (2 Piece)
Item No. 012050-238-3
UL971 listed and also available in 4 inch x 3 inch
6 Inch Coupling Secondary Fitting (2 Piece)
Item No. 012060-101-9
Used for containment of primary piping / fittings
6 Inch 45 Degree Elbow (2 Piece)
Item No. 012060-310-9
Used for containment of primary piping / fittings
6 Inch 90 Degree Elbow (2 Piece)
Item No. 012060-360-9
Used for containment of primary piping / fittings
6 Ounce PSX-20 Adhesive Kit - Single
Item No. 60210101
PSX-20 is a two-component epoxy typically used for bonding Primary FRP pipe and fittings.
6 Foot ENVIRO-LOC EVR Platinum Phase II Balance Vapor Recovery Hose With Venturi And Anti-Stretch Safety Cable
Item No. VDVP-EVR-072
ENVIRO-LOC EVR Platinum Balance Hose has a patented, variable design venturi (VDV) that allows for highest flow rates and best results in reducing flow collect ISD alarms. This uniquely designed hose uses an Anti-Stretch cable to reduce recoil during a drive off and eliminate the hose stretch putting the end pull diretctly on the breakaway.
8 Foot ENVIRO-LOC EVR Platinum Phase II Balance Vapor Recovery Hose With Venturi And Anti-Stretch Safety Cable
Item No. VDVP-EVR-096
- Certifications: UL Listed, California Air Resources Board (CARB) certified (Enhanced Vapor Recovery Specifications), California OSHA approved, California Department of Measurement Standards, California State Fire Marshal, California State Water Board
