Freedom Electronics
Lakeside Plastics
Narrow Your Results
Mfr / Trade Name
Category - Main
Manholes & Spill Containers
Caps & Adapters
Containment Sumps, Monitoring Wells & Flex Connectors
Valves, Drop Tubes & Vents
Mechanical Tank Gauges
Electronic Tank Gauges
Accessory
Type
Composition
Size
Tank Diameter
Tank Opening
Length
Gallon Size
Inlet
Color
Application
- List View
- Gallery View
4 Inch Fill Cap Top Seal Low Profile (E85 Approved)
Item No. 634LPC-0400
Designed for tight installations where clearance between top of fill Adapter and spill container cover are limited
3 Inch Duratuff Single Lever Action Top-Seal Cap
Item No. 634TE-7085
Single lever action top seal cap is designed to mate with 3 inch OPW 633T top seal Adapters
4 Inch Metal Top-Seal Fill Cap
Item No. 634TT-4000
Metal top seal cap with the same dimensions as the 634TT-7085
1-1/2 Inch Vertical Check Valve With Shear Groove (E85)
Item No. 70-0070
OPW Vertical Check Valves are installed the inlet to the pump in the dispenser island to maintain prime
1-1/2 Inch Vertical Check Valve With Test Port And Shear Groove Boss Mount (E85)
Item No. 70S-0075
OPW Vertical Check Valves are installed the inlet to the pump in the dispenser island to maintain prime
2 Inch Solenoid Valve Normally Closed 120/60 Vac - Upright And Vertical Mount Explosion Proof
Item No. 821-0200AC
The OPW 821 Solenoid Valve is designed to prevent accidental siphoning of above ground storage tanks if a leak or break occurs in the fuel supply line
1/2 Inch NPT Stainless Steel Thermal Pressure Relief Valve 25 Psi
Item No. 82RV-2505
Used to give thermal pressure relief to 821 series solenoid valve line
Face Seal Adapter (E85 Approved)
Item No. FSA-400
Provides a flat true sealing surface on threaded pipes where a gasket seal exists per EVR requirements
4 Inch Short Face Seal Adaptor For Cast Iron Base Only
Item No. FSA-400-S
Provides a flat true sealing surface on threaded pipes where a gasket seal exists per EVR requirements
Break Link For 202F Emergency Vent
Item No. H04869RE
Break link breaks at 3.5 PSI (0.24 bar)
Gasket For 61SALP, 61VSA, And 61SS Adapters
Item No. H09039M
Also a replacemnet for 1611AV and 633T
4 Inch Duratuff Toggle-Type Side Seal Cap
Item No. 62TT-7085
Designed to mate with 61AS side seal Adapter
4 Inch X 4 Inch Fill Adapter Bronze Top Seal
Item No. 633T-8076
Threads onto the 4 inch fill pipe of underground storage tanks to mate with top-seal delivery 4 inch elbows
2 Inch Open Vent Upward Aluminum
Item No. 23-0033
Installed on the top of vent pipes from underground or aboveground fuel storage tanks always open to the atmosphere to allow any pressure or vacuum in the tank to vent
3 Inch Open Vent Upward Aluminum
Item No. 23-0055
Installed on the top of vent pipes from underground or aboveground fuel storage tanks always open to the atmosphere to allow any pressure or vacuum in the tank to vent
3 Inch Thread-On 2-1/2 Inch To 6 Inch Water Column Pressure Vacuum Vent
Item No. 623V-3203
Pressure Vacuum Vents are installed on the top of vent pipes from underground or above ground fuel storage tanks
2 Inch X 6 Foot Drop Tube Kit
Item No. 61FT-0206
Designed to install on the bottom of the 61FSTOP AST overfill prevention valves when a lightweight, longer, lower drop tube is required
2 Inch Thread-On 2-1/2 Inch To 6 Inch Water Column Pressure Vacuum Vent
Item No. 623V-2203
Pressure Vacuum Vents are installed on the top of vent pipes from underground or above ground fuel storage tanks
4 Inch Bronze Swivel Fill Adapter
Item No. 61SALP-1020-EVR
The 61SA Swivel Adapter mates with 4 top-seal delivery elbows and features a top section that rotates with hose movement while the bottom section remains securely in place maintaining seal integrity
