1-1/2 Inch
Franklin Electric
Narrow Your Results
Mfr / Trade Name
Category - Main
Probe Float Kit
Sensor
Tank Probe
Manholes & Spill Containers
Caps & Adapters
Containment Sumps, Monitoring Wells & Flex Connectors
Submersible Pumps, Motors & Leak Detectors
Valves, Drop Tubes & Vents
Flexible Piping
Semi-Rigid
Accessory
Type
Composition
Size
Tank Diameter
Bury Depth
Riser Length
Fuel Type
Length
Gallon Size
Horse Power
Application
- List View
- Gallery View
| Page of 4 |
2 Inch Singlewall Or 1-1/2 Inch Doublewall UPP Entry Boot UL-971 Listed
Item No. 303-063-EIF-U
Defender Series CARB Approved AGB Compatible Poppeted Coaxial Overfill Prevention Valve With 6-1/2 Foot Top Drop Tube And 10 Foot Bottom Drop Tube
Item No. 708693924
Magnetically-coupled actuator system provides positive shutoff at a broad range of flow rates and eliminates any pentetrations in the valve making it both vapor and leak tight.
Flexible Ducting Connector With Clamps
Item No. DCT-400-F
Works on OPW AXP40 and Franklin DCT-400 Ducting
1-1/2 Inch Ducted Entry Boot For Xp-150-Sc
Item No. DEB-150-SC
Entry boot can be serviced from inside the sump eliminating the need for sump excavation
1-1/2 Inch Flexible Entry Boot For Xp-150-D
Item No. FEB-150-D
Entry boot can be serviced from inside the sump eliminating the need for sump excavation
Flexible Entry Boot For R-400-D & 4 Inch Single Wall Fiberglass
Item No. FEB-400-R
Entry boot can be serviced from inside the sump eliminating the need for sump excavation
1-1/2 Inch x 18 Inch Stainless Steel FLEX-ING Flex Connector With 1-1/2 Inch EZ-FIT Hex Male x 1-1/2 Inch EZ-FIT Hex Male Stainless Steel Ends
Item No. FF15X18EZMXEZM
Flexible connector features stainless steel corrugated fuel contact layers enclosed with high-grade stainless steel braid for aboveground and belowground applications.
1-1/2 Inch Brass Xp Clamshell Swivel Pipe Fittings
Item No. MS-XP-150-150
E-coated clamps provide durability and corrosion resistance from gas/alcohol blends (including E85) diesel and biodiesel. Installs on the end of 1-1/2 Inch single/secondary contained XP pipe with 1-1/2 Inch NPT
4 Inch Fill Swivel Adapter - Brass
Item No. SWF-100-B
Protects against fuel spills in the event of a piping break
4 Inch Vapor Swivel Adapter - Brass
Item No. SWV-101-B
Prevents vapor leaks at fill adapter due to loosening from riser during tank filling
4 Inch Diesel Float Kit
Item No. TSP-IDF4
Contains a Product and Water Float to be installed on the shaft of an LLx Mag Probe to monitor product and water levels in tank.
4 Inch Gasoline And Ethanol Blend Phase Separation Float Kit
Item No. TSP-IGF4P
Contains a Product and Water/Phase Separation Float to be installed on the shaft of an LLx Mag Probe to monitor product and water levels in tank.
4 Inch Hydrostatic Sensor Vented Locking Riser Cap Installation Kit - Spare Replacement
Item No. TSP-KV4
Cap is compression-fit into a 4 inch riser opening on double wall fiberglass tank resevoir via a lever.
1-1/2 Inch X 1000 Foot Secondary Contained Xp Pressure/Suction Product Piping
Item No. XP-150-SC-1000
1-1/2 Inch X 1500 Foot Secondary Contained XP Pressure/Suction Product Piping
Item No. XP-150-SC-1500
No possibility of piping layer delaminating due to the layered piping construction of high-grade material
1-1/2 Inch X 500 Foot Secondary Contained Xp Pressure/Suction Product Piping
Item No. XP-150-SC-500
No possibility of piping layer delaminating due to the layered piping construction of high-grade material
2 HP AG Variable Speed 90 Inch-151 Inch Intelligent Submersible Turbine Pump With MagShell Without Riser (ISTMR2-00)
Item No. 402731901
Variable speed variable length (90 - 151 inches) with MagShell motor. Includes standard model check valve (40 psi relief / 35 psi reset for MLD and TS-LS300)
4 Inch Monitoring Well Cap Plug
Item No. 77210201
Yellow in color with the words Caution Do Not Fill - Monitoring Well located on top
