Riser Pipe Extension
Extractor Valve
Narrow Your Results
Mfr / Trade Name
Category - Main
Valves, Drop Tubes & Vents
Composition
Size
- List View
- Gallery View
| Page of 2 |
4 Inch X 3-1/2 Inch Tall Riser Pipe Extension Long
Item No. 1002L-40
For use on all Adapters
4 Inch X 2-1/2 Inch Tall Riser Pipe Extension Short
Item No. 1002S-40
For use on all Adapters
4 Inch X 2 Inch X 4 Inch Extractor Tee No Cage (E85 Approved)
Item No. 233-4420
Threads into 4 inch NPT opening on an underground storage tank
4 Inch X 2 Inch X 2 Inch X 4 Inch Extractor Cross No Cage (E85 Approved)
Item No. 233-4422
Threads into 4 inch NPT opening on an underground storage tank
4 Inch X 3 Inch X 4 Inch Extractor Tee No Cage (E85 Approved)
Item No. 233-4430
Threads into 4 inch NPT opening on an underground storage tank
4 Inch X 3 Inch X 2 Inch X 4 Inch Extractor Cross No Cage (E85 Approved)
Item No. 233-4432
Threads into 4 inch NPT opening on an underground storage tank
4 Inch X 3 Inch X 3 Inch X 4 Inch Extractor Cross No Cage (E85 Approved)
Item No. 233-4433
Threads into 4 inch NPT opening on an underground storage tank
Test Plug For 233 Series Extractors
Item No. 233VP-6046
Incorporates an O-ring above the threads (on the plug) to isolate the tank from the vent piping system during tan test
Overfill Prevention Valve Drill Fixture Tool A1100
Item No. 566675
Aligns holes for drilling to ensure vapor-tight seal
Riser Extension 4 Inch NPT X 4 Inch Diameter X 2-1/2 Inch Installed Height
Item No. A0031-250
Obsolete Designed to compensate for height variances due to tank settling and heaving
Extractor Tee Fitting & 2 Inch Cage 4 Inch X 4 Inch X 2 Inch
Item No. A0079-120
Consists of a cast iron extractor body and an internal bar style cage
4 Inch x 4 Inch x 2 Inch Stainless Steel E85 Compatible Extractor Fitting
Item No. A0079-150SS
Fill/Vapor Adapter Wrench Complete With Cross-Bar, Shaft, And Bit
Item No. A0081-001
Use to install and remove EMCO Fill and Vapor Adapters with octagonal bases and the 494096 Riser Seal.
4 Inch X 4 Inch X 2 Inch NPT Extractor Vent Valve Without Cage
Item No. 31040011
E-Coated bodies are fully compatible for alcohol/gas blends and biodiesel
Swivel Wrench For 61SA Fill And 61VSA Vapor Adaptors
Item No. 61SA-TOOL
The 61SA-TOOL is a wrench designed to thread on the 61SA Fill and 61VSA vapor Adapters. The OPW 61SA-TOOL Adapter installation tool is required to insure proper installation of OPW rotatable swivel Adapters thread-on spill containers fill and vapor Adapters TC-400 torque cap for pipe nipples and threaded riser Adapters as per EVR requirements. The 61SA-TOOL includes provisions for the use of a torque wrench to facilitate accurate installation and testing
