Performance Ink
Catlow
Narrow Your Results
Mfr / Trade Name
Category - Main
Hanging Hardware
Dispenser Replacement Parts
Decals
Type
Composition
Fuel Type
Inlet
Color
Voltage
- List View
- Gallery View
| Page of 6 |
3/4 Inch Female X 3/4 Inch Female Cam Twist Magnetic Reconnectable Breakaway
Item No. CTM75
Dual poppet check valve design stops fuel in both directions
3/4 Inch Female X 3/4 Inch Female Shear-Pin Single-Use Breakaway
Item No. C86NT
Dual poppet check valve design stops fuel in both directions
Fueling System Emergency Shut-Down E-Stop Switch With Surface-Mount Weatherproof Enclosure And Clear Hinged Spring-Loaded Cover
Item No. EM01
Fueling system emergency shutdown switch mounted in a weatherproof enclosure. Shutdown switch is a momentary pushbutton type with a clear, hinged spring-loaded cover to minimize tampering.
Fueling System Emergency Shut-Down E-Stop Switch With High Visibility Yellow Surface-Mount Guarded Weatherproof Enclosure
Item No. EM01G
Fueling system emergency shutdown switch mounted in a guarded enclosure with a high visibility yellow cover. Shutdown switch is a momentary pushbutton type protected from the weather and accidental contact by the semi-circle guard.
ERGO75 Orange E25 Automatic Retail Prepay Nozzle With 3/4 Inch Inlet And 2-Step Hold Open Device. UL Listed
Item No. ER75E25A2-OR
- UL Certified. Cold weather design for -40 to 125 Degrees F.
ERGO75 Yellow E85 Automatic Retail Prepay Nozzle
Item No. ER75E85A2-Y
- UL Certified. Cold weather design for -40 to 125 Degrees F.
Wayne Helix Diesel 40 Minimum Cetane Rating Actuator Polycarbonate Overlay With Black Text On Yellow Background
Item No. HELIX-CET-40D
2-1/8 Inch Wide x 1-3/4 Inch Tall
Low-Voltage Dispenser Data And Card Reader Disconnect With CAT5/6 For Up To (4) Dispensers With Video Capabilities
Item No. LVDD-V-4
The Square D IPaCS LVDD Low Voltage Dispenser Disconnect provides a means to disconnect low voltage electrical circuits such as audio, video, data and communication circuits leading to or through dispensing equipment. The LVDD is intended to be used at fueling sites to provide compliance to National Fire Protection Association (NFPA) 30A Section 6.7 and National Electric Code (NEC) Sections 514.11 and 514.13. The Low Voltage Dispenser Disconnect has a versatile design which allows it to be compatible with all dispenser manufacturers Features Single point of disconnect capability for Power and Low Voltage circuits when installed with DMEX Dispenser Manager Solutions. Suitable for both New and Retrofit Construction
Gilbarco Encore 500S/700S Right Softkey Keypad Membrane For 10.4 Inch Display (M10206B001)
Item No. PI-1000-021
Use with ENE0502 series overlays
