Drain Plug
Capacitor
Narrow Your Results
Mfr / Trade Name
Manholes & Spill Containers
Caps & Adapters
Submersible Pumps, Motors & Leak Detectors
Type
Composition
Size
Tank Opening
Riser Length
- List View
- Gallery View
Page of 1 |
Replacement Drain Plug Kit For 1-2100 Series Manholes
Item No. 1DP-2100
Designed to eliminate the problems associated with water entering grade level spill containers
Capacitor Assembly For 1/3 To 1-1/2 Hp 60 Hz 15 Ufd 380 Volt Single-Phase
Item No. 400170931
15 MFD capacitor for FE Petro 1/3 to 1-1/2 HP 60 Hz 380 volt single-phase submersible motor
Capacitor Assembly For 2 Hp Fixed Speed 60 Hz 40 Ufd 370 Volt Single-Phase
Item No. 400170934
40 MFD capacitor for FE Petro 2 hp 60 Hz 370 volt single-phase fixed speed submersible motor
4 Inch Side Seal Cap
Item No. 405C-0100AC
Used for fill ports and access to leak detection on fuel storage tanks
40 Mfd Capacitor For 2 Hp Single Phase Stp
Item No. 410164-003
4 inch Red Jacket STP spare parts
4 Inch Tight-Fill Side-Seal Adapter
Item No. 61AS-2477
Threads onto the fill pipe of underground storage tanks - designed to mate with side-seal delivery elbows 4 inch threads / 4 inch elbow
4 Inch Duratuff Toggle-Type Side Seal Cap
Item No. 62TT-7085
Designed to mate with 61AS side seal Adapter
Extracta Capacitor 17-1/2 Mfd With Internal Bleed resistor (91P19186K50)
Item No. 111-092-5
Repair part for Red Jacket "Standard" and Maxxum Big Flo submersible turbines
25 Mfd Capacitor For 1-1/2 Hp With Internal Bleed Resistor (91P15256K50)
Item No. 111-661-5
Repair part for Red Jacket "Standard" submersible turbines
All-In-One Fill Swivel Adapter Kit For 5 Gallon PHIL-TITE And EBW Series Below-Grade Spill Containers With CARB EVR Stainless Fill Adapter, 4 Inch Top Seal Cap, And 5 Inch Riser Nipple
Item No. 70541201
The fill swivel adapter helps prevent leaks caused by constant fill delivery elbow movement on the riser adapter. The top section rotates during normal deliveries, preventing the bottom section from loosening on the riser pipe which could cause a vapor or product leak around the adapter.