Underground Storage Tank Equipment
C-Store
Narrow Your Results
Mfr / Trade Name
Category - Main
Valves, Drop Tubes & Vents
Composition
Size
- List View
- Gallery View
| Page of 1 |
2 Inch Angle Check Valve - Single Poppet Spring Loaded
Item No. 137-0300AV
Fitted with a light spring & soft seat made for standard check valve applications
1 1/2 Inch Buna Union Check Valve With Screen
Item No. 200AS-15
Easily inserted onto existing union fittings in suction systems
2 Inch Pressure Relief Nipple Check Valve Bronze Viton Seats
Item No. 212VPR-20-3650
Mounted in fuel lines at the submersible pump to hold the prime and prevent premature tripping of mechanical leak detectors
1-1/2 Inch Swing Check Valve - Threaded Brass
Item No. 246A-0100AV
Designed to prevent backflow in horizontal piping systems. Swing check valve allow liquid to flow in a single direction
2 Inch Swing Check Valve - Threaded Brass
Item No. 246A-0200AV
Designed to prevent backflow in horizontal piping systems. Swing check valve allow liquid to flow in a single direction
2 Inch Swing Check Valve - Threaded Brass With Thermal Expansion Relief At 25 Psi
Item No. 246A-0600AV
Designed to prevent backflow in horizontal piping systems. Swing check valve allow liquid to flow in a single direction
2 Inch Threaded Ductile Iron Swing Check Valve
Item No. 246ADI-0500AV
Designed to prevent backflow in horizontal piping systems. Swing check valve allow liquid to flow in a single direction
2 Inch Nipple Check Valve With 25 Psi Expansion Relief
Item No. 530-0100AV
One way check valve used to prevent backflow
Overfill Prevention Valve Drill Fixture Tool A1100
Item No. 566675
Aligns holes for drilling to ensure vapor-tight seal
1-1/2 Inch Vertical Check Valve With Shear Groove (E85)
Item No. 70-0070
OPW Vertical Check Valves are installed the inlet to the pump in the dispenser island to maintain prime
1-1/2 Inch Vertical Check Valve With Test Port And Shear Groove Boss Mount (E85)
Item No. 70S-0075
OPW Vertical Check Valves are installed the inlet to the pump in the dispenser island to maintain prime
Fill/Vapor Adapter Wrench
Item No. A0081-001
Use to install and remove EMCO Fill and Vapor Adapters with octagonal bases and the 494096 Riser Seal.
1-1/2 Inch And 2 Inch Extractor Wrench Tool
Item No. 89-0044
The OPW 89 Extractor Wrench is designed to install or remove OPW 53VML and 30MV Ball Float Vent Valves or OPW 233VP and 233VMP Test Plugs in OPW 233, 233V, and 233VM Extractor Fittings
3 Inch Swing Check Valve - Threaded Brass
Item No. 246A-0400AV
Designed to prevent backflow in horizontal piping systems. Swing check valve allow liquid to flow in a single direction
Swivel Wrench For 61SA Fill And 61VSA Vapor Adaptors
Item No. 61SA-TOOL
The 61SA-TOOL is a wrench designed to thread on the 61SA Fill and 61VSA vapor Adapters. The OPW 61SA-TOOL Adapter installation tool is required to insure proper installation of OPW rotatable swivel Adapters thread-on spill containers fill and vapor Adapters TC-400 torque cap for pipe nipples and threaded riser Adapters as per EVR requirements. The 61SA-TOOL includes provisions for the use of a torque wrench to facilitate accurate installation and testing
