Bronze
Brass
Narrow Your Results
Mfr / Trade Name
Manholes & Spill Containers
Caps & Adapters
Valves, Drop Tubes & Vents
Accessory
Type
Composition
Size
Gallon Size
Pressure Differential
Voltage
- List View
- Gallery View
| Page of 2 |
2 Inch Angle Check Valve - Single Poppet Spring Loaded
Item No. 137-0300AV
Fitted with a light spring & soft seat made for standard check valve applications
3 Inch X 4 Inch Vapor Recovery Adapter Bronze
Item No. 1611AVB-1625
Poppeted Adapter designed to mate with vapor recovery elbow
1-1/2 Inch Full Port Two-Way Ball Valve
Item No. 21BV-0150
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
2 Inch Full Port 2-Way Brass Ball Valve
Item No. 21BV-0200
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
3 Inch Full Port Two-Way Ball Valve
Item No. 21BV-0300
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
4 Inch Tight Fill Adapter- Top Seal Without Lugs- Carb EVR Approved
Item No. 305-0200AAEVR
Top seal Adapters thread onto underground and aboveground storage tank fill ports and riser pipes where tight fill connections are required
4 Inch Brass Top Seal Tight Fill Adapter With Lugs
Item No. 305L-0200AA
EVR Approved used for fill ports and access to leak detection on fuel storage tanks
3/4 Inch Single Poppet Foot Valve
Item No. 334-0100AV
Installed at the inlet of a suction line bottom of the storage tank
1 Inch Single Poppet Foot Valve
Item No. 334-0200AV
Installed at the inlet of a suction line bottom of the storage tank
1-1/2 Inch Single Poppet Foot Valve
Item No. 334-0300AV
Installed at the inlet of a suction line bottom of the storage tank
2 Inch Single Poppet Foot Valve
Item No. 334-0400AV
Installed at the inlet of a suction line bottom of the storage tank
1-1/2 Inch Double Poppet Foot Valve
Item No. 335A-0100AV
Installed at the inlet of a suction line normally at the bottom of the storage tank as a prime holding valve.
2 Inch Double Poppet Foot Valve
Item No. 335A-0200AV
Installed at the inlet of a suction line normally at the bottom of the storage tank as a prime holding valve.
4 Inch Extractor Pipe Cap - Brass
Item No. 578-0100AC
Used as a cover for the extractor / float vent valve overfill system
4 Inch Tight-Fill Side-Seal Adapter
Item No. 61AS-2477
Threads onto the fill pipe of underground storage tanks - designed to mate with side-seal delivery elbows 4 inch threads / 4 inch elbow
3 Inch X 3 Inch Bronze Fill Pipe Adapter
Item No. 633T-8060
Threads onto the 3 Inch fill pipe of underground storage tanks to mate with top-seal delivery 3 inch elbow
1 Inch Solenoid Valve Viton Seal 120 Volt/60 Hz Ac Coil
Item No. 710-01001V
Installed on piping leading from an aboveground tank to prevent accidental siphoning
1-1/2 Inch Solenoid Valve Viton Seal 120 Volt
Item No. 710-01501V
Installed on piping leading from an aboveground tank to prevent accidental siphoning
2 Inch Solenoid Valve Viton Seal 120 Volt Explosion Proof
Item No. 710-02001V
Installed on piping leading from an aboveground tank to prevent accidental siphoning
3 Inch Solenoid Valve Viton Seal 120 Volt/60 Hz Volt Ac Coil
Item No. 710-03001V
Installed on piping leading from an aboveground tank to prevent accidental siphoning
3 Inch Bronze Fill Adapter Cap
Item No. 724-3040
Threads onto the fill pipe by means of internal wrenching lugs. Compatible with Universal 731 and 733 caps. Compatible with E-85
Fill Adapter - Brass - Lugs 4 Inch Npsm X 4 Inch Cam & Groove
Item No. A0030-024
Designed for use with conventional or dual point fill systems
4 Inch Fill Swivel Adapter - Brass
Item No. SWF-100-B
Protects against fuel spills in the event of a piping break
4 Inch Vapor Swivel Adapter - Brass
Item No. SWV-101-B
Prevents vapor leaks at fill adapter due to loosening from riser during tank filling
