Franklin Electric
Adco Industires
Narrow Your Results
Mfr / Trade Name
Category - Main
Console Hardware & Modules
Probe Float Kit
Replacement Parts & Spare Modules
Sensor
Tank Probe
Hanging Hardware
Dispenser Replacement Parts
Manholes & Spill Containers
Caps & Adapters
Containment Sumps, Monitoring Wells & Flex Connectors
Submersible Pumps, Motors & Leak Detectors
Valves, Drop Tubes & Vents
Flexible Piping
Semi-Rigid
Accessory
Emergency Shut Off Units
Type
Composition
Size
Skirt Length
Tank Opening
Bury Depth
Riser Length
Fuel Type
Length
Gallon Size
Horse Power
Inlet
Color
Application
- List View
- Gallery View
4 Inch Gasoline And Ethanol Blend Phase Separation Float Kit
Item No. TSP-IGF4P
Contains a Product and Water/Phase Separation Float to be installed on the shaft of an LLx Mag Probe to monitor product and water levels in tank.
4 Inch Hydrostatic Sensor Vented Locking Riser Cap Installation Kit - Spare Replacement
Item No. TSP-KV4
Cap is compression-fit into a 4 inch riser opening on double wall fiberglass tank resevoir via a lever.
Vane & Rotor Replacement Kit Carb Approved
Item No. VP1000VRC-G
Connects to the dispenser with a simple interface module without costly software changes or electronic board replacement
1-1/2 Inch X 1000 Foot Secondary Contained Xp Pressure/Suction Product Piping
Item No. XP-150-SC-1000
1-1/2 Inch X 1500 Foot Secondary Contained XP Pressure/Suction Product Piping
Item No. XP-150-SC-1500
No possibility of piping layer delaminating due to the layered piping construction of high-grade material
1-1/2 Inch X 500 Foot Secondary Contained Xp Pressure/Suction Product Piping
Item No. XP-150-SC-500
No possibility of piping layer delaminating due to the layered piping construction of high-grade material
1-3/4 Inch X 500 Foot Secondary Contained Xp Pressure/Suction Product Piping
Item No. XP-175-SC-500
No possibility of piping layer delaminating due to the layered piping construction of high-grade material
2 Inch X 200 Foot Secondary Contained Xp Pressure/Suction Product Piping
Item No. XP-200-SC-200
No possibility of piping layer delamination due to the layered piping construction of high-grade material
2 HP AG Variable Speed 90 Inch-151 Inch Intelligent Submersible Turbine Pump With MagShell Without Riser (ISTMR2-00)
Item No. 402731901
Variable speed variable length (90 - 151 inches) with MagShell motor. Includes standard model check valve (40 psi relief / 35 psi reset for MLD and TS-LS300)
2 Inch x 28 Foot UPP Semi-Rigid Doublewall Pipe UL-971 Listed
Item No. 001-075-063-028PSE
The highly efficient electrofusion welding process that connects pipe fittings boots and containment to create a seamless direct burial pipework system
2 Inch x 165 Foot Coil UPP Semi-Rigid Doublewall Pipe UL-971 Listed
Item No. 001-075-063-165PSE
The highly efficient electrofusion welding process that connects pipe fittings boots and containment to create a seamless direct burial pipework system
2 Inch O-Ring Seal Pressure Vacuum Vent
Item No. 80230302
Vent rates of 8000 cubic feet per hour and vent at 13.8 in WC of pressure and 0.8 in WC of vacuum.
4 Inch Monitoring Well Cap Plug
Item No. 77210201
Yellow in color with the words Caution Do Not Fill - Monitoring Well located on top
Replacement Nickel-Plated Brass Shear Screw For 8701 In-Line Breakaway
Item No. 787
350 Pound
36 Inch Round Gray EBW Safelite Bolt-Down Fiberglass Composite Manhole Cover With Handle
Item No. 78145606
H-20 rated lightweight manhole provides access to underground service station, commercial, and industrial equipment.Composite covers have undergone 30 year life simulation testing, with 11,000 loading cycles of 20,000 lbs. each.