Franklin Electric
Narrow Your Results
Mfr / Trade Name
Category - Main
Console Hardware & Modules
Probe Float Kit
Replacement Parts & Spare Modules
Sensor
Tank Probe
Hanging Hardware
Dispenser Replacement Parts
Manholes & Spill Containers
Caps & Adapters
Containment Sumps, Monitoring Wells & Flex Connectors
Submersible Pumps, Motors & Leak Detectors
Valves, Drop Tubes & Vents
Flexible Piping
Semi-Rigid
Accessory
Emergency Shut Off Units
Type
Composition
Size
Skirt Length
Tank Opening
Bury Depth
Riser Length
Fuel Type
Length
Gallon Size
Horse Power
Inlet
Color
Application
- List View
- Gallery View
4 Inch Gasoline And Ethanol Blend Phase Separation Float Kit
Item No. TSP-IGF4P
Contains a Product and Water/Phase Separation Float to be installed on the shaft of an LLx Mag Probe to monitor product and water levels in tank.
4 Inch Hydrostatic Sensor Vented Locking Riser Cap Installation Kit - Spare Replacement
Item No. TSP-KV4
Cap is compression-fit into a 4 inch riser opening on double wall fiberglass tank resevoir via a lever.
Vane & Rotor Replacement Kit Carb Approved
Item No. VP1000VRC-G
Connects to the dispenser with a simple interface module without costly software changes or electronic board replacement
1-1/2 Inch X 1000 Foot Secondary Contained Xp Pressure/Suction Product Piping
Item No. XP-150-SC-1000
1-1/2 Inch X 1500 Foot Secondary Contained XP Pressure/Suction Product Piping
Item No. XP-150-SC-1500
No possibility of piping layer delaminating due to the layered piping construction of high-grade material
1-1/2 Inch X 500 Foot Secondary Contained Xp Pressure/Suction Product Piping
Item No. XP-150-SC-500
No possibility of piping layer delaminating due to the layered piping construction of high-grade material
1-3/4 Inch X 500 Foot Secondary Contained Xp Pressure/Suction Product Piping
Item No. XP-175-SC-500
No possibility of piping layer delaminating due to the layered piping construction of high-grade material
2 Inch X 200 Foot Secondary Contained Xp Pressure/Suction Product Piping
Item No. XP-200-SC-200
No possibility of piping layer delamination due to the layered piping construction of high-grade material
2 HP AG Variable Speed 90 Inch-151 Inch Intelligent Submersible Turbine Pump With MagShell Without Riser (ISTMR2-00)
Item No. 402731901
Variable speed variable length (90 - 151 inches) with MagShell motor. Includes standard model check valve (40 psi relief / 35 psi reset for MLD and TS-LS300)
2 Inch x 28 Foot UPP Semi-Rigid Doublewall Pipe UL-971 Listed
Item No. 001-075-063-028PSE
The highly efficient electrofusion welding process that connects pipe fittings boots and containment to create a seamless direct burial pipework system
2 Inch x 165 Foot Coil UPP Semi-Rigid Doublewall Pipe UL-971 Listed
Item No. 001-075-063-165PSE
The highly efficient electrofusion welding process that connects pipe fittings boots and containment to create a seamless direct burial pipework system
2 Inch O-Ring Seal Pressure Vacuum Vent
Item No. 80230302
Vent rates of 8000 cubic feet per hour and vent at 13.8 in WC of pressure and 0.8 in WC of vacuum.
4 Inch Monitoring Well Cap Plug
Item No. 77210201
Yellow in color with the words Caution Do Not Fill - Monitoring Well located on top
Replacement Nickel-Plated Brass Shear Screw For 8701 In-Line Breakaway
Item No. 787
350 Pound
36 Inch Round Gray EBW Safelite Bolt-Down Fiberglass Composite Manhole Cover With Handle
Item No. 78145606
H-20 rated lightweight manhole provides access to underground service station, commercial, and industrial equipment.Composite covers have undergone 30 year life simulation testing, with 11,000 loading cycles of 20,000 lbs. each.
Standard Hose Breakaway With Vapor Path Shut-Off 350 Pound Strength
Item No. 8701VV
Healy straight thread breakaway designed to pull apart at maximum 350 pound pull force with 1 shear pin (1 extra pin supplied)
