Dispenser Equipment
Aboveground Storage Tank Equipment
Narrow Your Results
Mfr / Trade Name
Category - Main
Caps & Adapters
Containment Sumps, Monitoring Wells & Flex Connectors
Valves, Drop Tubes & Vents
Mechanical Tank Gauges
Accessory
Type
Composition
Size
Tank Diameter
Tank Opening
Fuel Type
Length
Inlet
Application
Pressure Differential
Voltage
- List View
- Gallery View
| Page of 3 |
2 Inch Angle Check Valve - Single Poppet Spring Loaded
Item No. 137-0300AV
Fitted with a light spring & soft seat made for standard check valve applications
2 Inch Tee Double Outlet Vent Threaded Female NPT
Item No. 155-0500AV
Aluminum t-style vent used primarily on small fuel oil storage tanks
2 Inch Anti-Syphon Valve 5 To 10 Foot Head Pressure
Item No. 199ASV-2200
Factory-adjusted hydrostatic head pressure settings
2 Inch Anti-Syphon Valve 10 To 15 Foot Head Pressure
Item No. 199ASV-3200
Factory-adjusted hydrostatic head pressure settings
2 Inch Full Port 2-Way Brass Ball Valve
Item No. 21BV-0200
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
2 Inch Swing Check Valve - Threaded Brass
Item No. 246A-0200AV
Designed to prevent backflow in horizontal piping systems. Swing check valve allow liquid to flow in a single direction
2 Inch Swing Check Valve - Threaded Brass With Thermal Expansion Relief At 25 Psi
Item No. 246A-0600AV
Designed to prevent backflow in horizontal piping systems. Swing check valve allow liquid to flow in a single direction
2 Inch Threaded Ductile Iron Swing Check Valve
Item No. 246ADI-0500AV
Designed to prevent backflow in horizontal piping systems. Swing check valve allow liquid to flow in a single direction
2 Inch Single Poppet Foot Valve
Item No. 334-0400AV
Installed at the inlet of a suction line bottom of the storage tank
2 Inch Double Poppet Foot Valve
Item No. 335A-0200AV
Installed at the inlet of a suction line normally at the bottom of the storage tank as a prime holding valve.
2 Inch Updraft Vent
Item No. 354-0200AV
Open vent design used on underground and above ground tanks
2 Inch Slip-On Adapter For Series 523 Vents
Item No. 523SA-1002
Converts a 523V and 623V vent to a 2 inch slip on vent
2 Inch Solenoid Valve Viton Seal 120 Volt Explosion Proof
Item No. 710-02001V
Installed on piping leading from an aboveground tank to prevent accidental siphoning
2 Inch Solenoid Valve Stainless Steel Teflon With 120 Volt/60 Hz Ac Coil
Item No. 710SS-22001V
Installed on piping leading from an aboveground tank to prevent accidental siphoning
2 Inch EVR Clock Gauge With Female Threads And Drop Tube Float
Item No. 818F-0400AGEVR
Used to measure liquid levels in aboveground storage tanks.
2 Inch Ast Overfill Prevention Valve With Part F Adapter 2 Inch Shut-Off Height
Item No. 9095DS-0200AV
Prevents overfilling storage tanks by providing a positive shut-off during a pressurized fill. installs in a 2 inch Female threaded opening at the fill port of a storage tank
2 Inch NPT 90 Degree Anti-Siphon Valve With Thermal Expansion Relief 0-5 Foot W.C.
Item No. 910-2000AV
Normally closed valve helps prevent accidental siphoning of product from tank due to downstream leak below liquid level.
2 Inch NPT 90 Degree Anti-Siphon Valve With Thermal Expansion Relief 5-10 Foot W.C.
Item No. 910-2100AV
Normally closed valve helps prevent accidental siphoning of product from tank due to downstream leak below liquid level.
2 Inch NPT Thread-On Aluminum Pressure Vacuum Vent 2-1/2 - 6 Inch Range Water Column Pressure 6 - 10 Inch Range Vacuum
Item No. A0084-038
Is an internal pressure vacuum valve that restricts vaopr escape during product drops.
2 Inch Stainless Steel QuickClamp
Item No. ACQCLAMP0200
FireShield QuickClamp assemblies offer installers the ability to fasten one or both ends of a connector within a piping system with minimal use of tools
