C-Store
Aboveground Storage Tank Equipment
Narrow Your Results
Mfr / Trade Name
Category - Main
Manholes & Spill Containers
Caps & Adapters
Submersible Pumps, Motors & Leak Detectors
Valves, Drop Tubes & Vents
Type
Composition
Size
Length
Gallon Size
Color
Application
- List View
- Gallery View
| Page of 3 |
2 Inch Angle Check Valve - Single Poppet Spring Loaded
Item No. 137-0300AV
Fitted with a light spring & soft seat made for standard check valve applications
1-1/2 Inch Full Port Two-Way Ball Valve
Item No. 21BV-0150
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
2 Inch Full Port 2-Way Brass Ball Valve
Item No. 21BV-0200
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
3 Inch Full Port Two-Way Ball Valve
Item No. 21BV-0300
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
4 Inch Tight Fill Adapter- Top Seal Without Lugs- Carb EVR Approved
Item No. 305-0200AAEVR
Top seal Adapters thread onto underground and aboveground storage tank fill ports and riser pipes where tight fill connections are required
4 Inch Brass Top Seal Tight Fill Adapter With Lugs
Item No. 305L-0200AA
EVR Approved used for fill ports and access to leak detection on fuel storage tanks
3/4 Inch Single Poppet Foot Valve
Item No. 334-0100AV
Installed at the inlet of a suction line bottom of the storage tank
1 Inch Single Poppet Foot Valve
Item No. 334-0200AV
Installed at the inlet of a suction line bottom of the storage tank
1-1/2 Inch Single Poppet Foot Valve
Item No. 334-0300AV
Installed at the inlet of a suction line bottom of the storage tank
2 Inch Single Poppet Foot Valve
Item No. 334-0400AV
Installed at the inlet of a suction line bottom of the storage tank
1-1/2 Inch Double Poppet Foot Valve
Item No. 335A-0100AV
Installed at the inlet of a suction line normally at the bottom of the storage tank as a prime holding valve.
2 Inch Double Poppet Foot Valve
Item No. 335A-0200AV
Installed at the inlet of a suction line normally at the bottom of the storage tank as a prime holding valve.
4 Inch NPT Male x 4 Inch x 0.188 Inch Black Steel Submersible Pump Riser Pipe Nipple
Item No. 404RISER
0.188 wall thickness to accommodate submersible pump installation.
4 Inch NPT Male x 5 Inch x 0.188 Inch Black Steel Submersible Pump Riser Pipe Nipple
Item No. 405RISER
0.188 wall thickness to accommodate submersible pump installation.
4 Inch NPT Male x 6 Inch x 0.188 Inch Black Steel Submersible Pump Riser Pipe Nipple
Item No. 406RISER
0.188 wall thickness to accommodate submersible pump installation.
4 Inch NPT Male x 7 Inch x 0.188 Inch Black Steel Submersible Pump Riser Pipe Nipple
Item No. 407RISER
0.188 wall thickness to accommodate submersible pump installation.
4 Inch NPT Male x 9 Inch x 0.188 Inch Black Steel Submersible Pump Riser Pipe Nipple
Item No. 409RISER
0.188 wall thickness to accommodate submersible pump installation.
4 Inch NPT Male x 10 Inch x 0.188 Inch Black Steel Submersible Pump Riser Pipe Nipple
Item No. 410RISER
0.188 wall thickness to accommodate submersible pump installation.
4 Inch NPT Male x 11 Inch x 0.188 Inch Black Steel Submersible Pump Riser Pipe Nipple
Item No. 411RISER
0.188 wall thickness to accommodate submersible pump installation.
4 Inch NPT Male x 12 Inch x 0.188 Inch Black Steel Submersible Pump Riser Pipe Nipple
Item No. 412RISER
0.188 wall thickness to accommodate submersible pump installation.
4 Inch NPT Male x 13 Inch x 0.188 Inch Black Steel Submersible Pump Riser Pipe Nipple
Item No. 413RISER
0.188 wall thickness to accommodate submersible pump installation.
4 Inch NPT Male x 15 Inch x 0.188 Inch Black Steel Submersible Pump Riser Pipe Nipple
Item No. 415RISER
0.188 wall thickness to accommodate submersible pump installation.
