2 Inch Female
Aboveground Storage Tank Equipment
Narrow Your Results
Mfr / Trade Name
Category - Main
Manholes & Spill Containers
Containment Sumps, Monitoring Wells & Flex Connectors
Valves, Drop Tubes & Vents
Mechanical Tank Gauges
Accessory
Type
Composition
Size
Tank Diameter
Tank Opening
Fuel Type
Length
Gallon Size
Inlet
Color
Application
Pressure Differential
Voltage
- List View
- Gallery View
Page of 2 |
3 Inch CARB EVR Orange Vapor Recovery Adapter Cap ( E85 Approved)
Item No. 1711T-7085-EVR
For use with 1611AV 61VSA 1611AVB and 1611VR Adapters
3 Inch Orange Flat Top Cap Vapor Recovery Low Profile
Item No. 0613VC-30
Cam action handle
3 Inch Threaded Double Outlet Vent Female NPT
Item No. 155-0600AV
Aluminum t-style vent used primarily on small fuel oil storage tanks
3 Inch Cap Vapor Recovery Low Profile (E85 Approved)
Item No. 1711LPC-0300
When engaged the locking cap adds only 1/2 inch to the final height of Adapter
2 Inch Fill Cap & Adapter - Brass Body Iron Cap
Item No. 178-0300AC
Designed for tank filling applications where a tight fill connection is not required. Adapter permeanetly threads onto riser pipe of fill nipple then cap threads onto Adapter
2 Inch Gauge Stick Port Cap & Adapter- Brass Body Aluminum Cap
Item No. 178GSP-0100AC
Designed to identify and secure a tank opening dedicated to gauging the product with a gauge stick
2 Inch Aluminum Hinged Style Fill Cap Female Thread
Item No. 179-0100AC
All aluminum construction
Ast Mechanical Tank Gauge - Up To 18 Feet
Item No. 200TG-ENG
Designed for reading liquid levels in horizontal or vertical aboveground storage tanks in English foot and inch units
3 Inch Full Port Two-Way Ball Valve
Item No. 21BV-0300
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
2 Inch 15 Gallon Ast Remote Spill Container - Female Threaded
Item No. 515-0200AC
Purpose of containing fuel spillage during remote tank filling operations
2 Inch 3-1/2 Gallon Ast Spill Container Female Threaded Inlet And Outlet
Item No. 517F-0100AC
Designed to contain small spills that occur at the fill point on aboveground storage tanks
3 Inch Slip-On Adapter For Series 523 Vents
Item No. 523SA-1003
Converts a 523V and 623V ent to a 3 inch slip on vent
3 Inch X 3 Inch Bronze Fill Pipe Adapter
Item No. 633T-8060
Threads onto the 3 Inch fill pipe of underground storage tanks to mate with top-seal delivery 3 inch elbow
3 Inch Duratuff Single Lever Action Top-Seal Cap
Item No. 634TE-7085
Single lever action top seal cap is designed to mate with 3 inch OPW 633T top seal Adapters
3 Inch Solenoid Valve Viton Seal 120 Volt/60 Hz Volt Ac Coil
Item No. 710-03001V
Installed on piping leading from an aboveground tank to prevent accidental siphoning
3 Inch Bronze Fill Adapter Cap
Item No. 724-3040
Threads onto the fill pipe by means of internal wrenching lugs. Compatible with Universal 731 and 733 caps. Compatible with E-85
2 Inch Clock Gauge Female Thread Standard Float Carb Evr Approved
Item No. 818F-0100AGEVR
Used to measure liquid levels in aboveground storage tanks
2 Inch Clock Gauge Alarm - Female Threaded With Standard Float
Item No. 918F-0100AG
Used to measure liquid levels in aboveground storage tanks
2 Inch Clock Gauge Alarm - Female Threaded With Drop Tube Float
Item No. 918F-0400AG
Used to measure liquid levels in aboveground storage tanks
2 Inch 8 Ounce Combination Vent/Overfill Alarm
Item No. 922-0200AA
Fully mechanical high intensity audible alarm that alerts you when your tank is near full while also allowing your tank to breath during filling & dispensing
3 Inch x 18 Inch Stainless Steel FLEX-ING Flex Connector With 3 Inch Nickel-Plated Steel Non-Hex Male x 3 Inch Stainless Steel EZ-FIT Hex Female Ends
Item No. FF30X18MXEZF
Flexible connector features stainless steel corrugated fuel contact layers enclosed with high-grade stainless steel braid for aboveground and belowground applications.
3 Inch Open Vent Upward Aluminum
Item No. 23-0055
Installed on the top of vent pipes from underground or aboveground fuel storage tanks always open to the atmosphere to allow any pressure or vacuum in the tank to vent