1-1/2 Inch
Aboveground Storage Tank Equipment
Narrow Your Results
Mfr / Trade Name
Category - Main
Caps & Adapters
Containment Sumps, Monitoring Wells & Flex Connectors
Valves, Drop Tubes & Vents
Accessory
Type
Composition
Tank Opening
Fuel Type
Length
Inlet
Color
Application
Pressure Differential
Voltage
- List View
- Gallery View
| Page of 3 |
3 Inch CARB EVR Orange Vapor Recovery Adapter Cap ( E85 Approved)
Item No. 1711T-7085-EVR
For use with 1611AV 61VSA 1611AVB and 1611VR Adapters
3 Inch Orange Flat Top Cap Vapor Recovery Low Profile
Item No. 0613VC-30
Cam action handle
1-1/2 Inch Threaded Double Outlet Vent Female NPT
Item No. 155-0400AV
Aluminum t-style vent used primarily on small fuel oil storage tanks
3 Inch Threaded Double Outlet Vent Female NPT
Item No. 155-0600AV
Aluminum t-style vent used primarily on small fuel oil storage tanks
3 Inch Cap Vapor Recovery Low Profile (E85 Approved)
Item No. 1711LPC-0300
When engaged the locking cap adds only 1/2 inch to the final height of Adapter
1-1/2 Inch Anti-Syphon Valve 5 To 10 Foot Head Pressure
Item No. 199ASV-2150
Factory-adjusted hydrostatic head pressure settings
1 1/2 Inch Buna Union Check Valve With Screen
Item No. 200AS-15
Easily inserted onto existing union fittings in suction systems
1-1/2 Inch Full Port Two-Way Ball Valve
Item No. 21BV-0150
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
3 Inch Full Port Two-Way Ball Valve
Item No. 21BV-0300
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
1-1/2 Inch Open Vent Upward Aluminum
Item No. 23-0044
Installed on the top of vent pipes from underground or aboveground fuel storage tanks always open to the atmosphere to allow any pressure or vacuum in the tank to vent
1-1/2 Inch Swing Check Valve - Threaded Brass
Item No. 246A-0100AV
Designed to prevent backflow in horizontal piping systems. Swing check valve allow liquid to flow in a single direction
1-1/2 Inch Single Poppet Foot Valve
Item No. 334-0300AV
Installed at the inlet of a suction line bottom of the storage tank
1-1/2 Inch Double Poppet Foot Valve
Item No. 335A-0100AV
Installed at the inlet of a suction line normally at the bottom of the storage tank as a prime holding valve.
3 Inch Slip-On Adapter For Series 523 Vents
Item No. 523SA-1003
Converts a 523V and 623V ent to a 3 inch slip on vent
3 Inch X 3 Inch Bronze Fill Pipe Adapter
Item No. 633T-8060
Threads onto the 3 Inch fill pipe of underground storage tanks to mate with top-seal delivery 3 inch elbow
3 Inch Duratuff Single Lever Action Top-Seal Cap
Item No. 634TE-7085
Single lever action top seal cap is designed to mate with 3 inch OPW 633T top seal Adapters
1-1/2 Inch Full Port Stainless Steel Locking Ball Valve
Item No. 691BSS-07001V
Full port valve is used for liquid or air service handling with manual open / close in quick quarter-turn handle operartion
1-1/2 Inch Vertical Check Valve With Shear Groove (E85)
Item No. 70-0070
OPW Vertical Check Valves are installed the inlet to the pump in the dispenser island to maintain prime
1-1/2 Inch Vertical Check Valve With Test Port And Shear Groove Boss Mount (E85)
Item No. 70S-0075
OPW Vertical Check Valves are installed the inlet to the pump in the dispenser island to maintain prime
1-1/2 Inch Solenoid Valve Viton Seal 120 Volt
Item No. 710-01501V
Installed on piping leading from an aboveground tank to prevent accidental siphoning
3 Inch Solenoid Valve Viton Seal 120 Volt/60 Hz Volt Ac Coil
Item No. 710-03001V
Installed on piping leading from an aboveground tank to prevent accidental siphoning
1-1/2 Inch Solenoid Valve Stainless Steel Teflon With 120 Volt/60 Hz Ac Coil
Item No. 710SS-21501V
Installed on piping leading from an aboveground tank to prevent accidental siphoning
3 Inch Bronze Fill Adapter Cap
Item No. 724-3040
Threads onto the fill pipe by means of internal wrenching lugs. Compatible with Universal 731 and 733 caps. Compatible with E-85