1-1/2 Inch
Aboveground Storage Tank Equipment
Narrow Your Results
Mfr / Trade Name
Category - Main
Manholes & Spill Containers
Caps & Adapters
Containment Sumps, Monitoring Wells & Flex Connectors
Valves, Drop Tubes & Vents
Mechanical Tank Gauges
Type
Composition
Size
Tank Diameter
Fuel Type
Length
Gallon Size
Color
Application
Pressure Differential
Voltage
- List View
- Gallery View
| Page of 2 |
1-1/2 Inch Threaded Double Outlet Vent Female NPT
Item No. 155-0400AV
Aluminum t-style vent used primarily on small fuel oil storage tanks
2 Inch Aluminum Hinged Style Fill Cap Male Thread
Item No. 179M-0100AC
All aluminum construction
1-1/2 Inch Anti-Syphon Valve 5 To 10 Foot Head Pressure
Item No. 199ASV-2150
Factory-adjusted hydrostatic head pressure settings
1 1/2 Inch Buna Union Check Valve With Screen
Item No. 200AS-15
Easily inserted onto existing union fittings in suction systems
1-1/2 Inch Full Port Two-Way Ball Valve
Item No. 21BV-0150
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
1-1/2 Inch Open Vent Upward Aluminum
Item No. 23-0044
Installed on the top of vent pipes from underground or aboveground fuel storage tanks always open to the atmosphere to allow any pressure or vacuum in the tank to vent
1-1/2 Inch Swing Check Valve - Threaded Brass
Item No. 246A-0100AV
Designed to prevent backflow in horizontal piping systems. Swing check valve allow liquid to flow in a single direction
1-1/2 Inch Single Poppet Foot Valve
Item No. 334-0300AV
Installed at the inlet of a suction line bottom of the storage tank
1-1/2 Inch Double Poppet Foot Valve
Item No. 335A-0100AV
Installed at the inlet of a suction line normally at the bottom of the storage tank as a prime holding valve.
2 Inch 3-1/2 Gallon Ast Spill Container
Item No. 517-0100AC
Designed to contain small spills that occur at the fill point on aboveground storage tanks
2 Inch 7-1/2 Gallon Above Ground Storage Tank Spill Container With Drain - Male Threads Offset Mount
Item No. 518M-0200AC
Designed to contain small spills that occur at the fill point on aboveground storage tanks
1-1/2 Inch Full Port Stainless Steel Locking Ball Valve
Item No. 691BSS-07001V
Full port valve is used for liquid or air service handling with manual open / close in quick quarter-turn handle operartion
1-1/2 Inch Vertical Check Valve With Shear Groove (E85)
Item No. 70-0070
OPW Vertical Check Valves are installed the inlet to the pump in the dispenser island to maintain prime
1-1/2 Inch Vertical Check Valve With Test Port And Shear Groove Boss Mount (E85)
Item No. 70S-0075
OPW Vertical Check Valves are installed the inlet to the pump in the dispenser island to maintain prime
1-1/2 Inch Solenoid Valve Viton Seal 120 Volt
Item No. 710-01501V
Installed on piping leading from an aboveground tank to prevent accidental siphoning
1-1/2 Inch Solenoid Valve Stainless Steel Teflon With 120 Volt/60 Hz Ac Coil
Item No. 710SS-21501V
Installed on piping leading from an aboveground tank to prevent accidental siphoning
2 Inch Clock Gauge With Standard Float Carb EVR Approved
Item No. 818-0100AGEVR
Used to measure liquid levels in aboveground storage tanks
1-1/2 Inch NPT 90 Degree Anti-Siphon Valve With Thermal Expansion Relief 5-10 Foot W.C.
Item No. 910-1100AV
Normally closed valve helps prevent accidental siphoning of product from tank due to downstream leak below liquid level.
2 Inch Clock Gauge Alarm With Float
Item No. 918-0100AG
Utilizes the 818 series clock gauge with a built in high level warning alarm
