4 Inch Male
3 Inch x 2 Inch
Narrow Your Results
Mfr / Trade Name
Category - Main
Manholes & Spill Containers
Valves, Drop Tubes & Vents
Fiberglass
Flexible Piping
Semi-Rigid
Test & Temination Reducers
Decals
Type
Composition
Size
Gallon Size
Color
Application
- List View
- Gallery View
| Page of 1 |
3 Inch X 2 Inch Reducer Bushing Scarfed O.D. X Taper I.D.
Item No. 012030-231-7
UL 971 listed
4 Inch X 2-1/2 Inch Tall Riser Pipe Extension Short
Item No. 1002S-40
For use on all Adapters
4 Inch Male NPT 8 Ounce/Square Inch Aluminum Emergency Vent With Cast Iron Cover And FKM Viton A O-Ring UL 2583 And ULC Listed
Item No. 244OM-0100AV
UL Listed emergency vent (pressure relief only) used on aboveground storage tanks, as a code requirement, to help prevent the tank from becoming over-pressurized and possibly rupturing if ever exposed to fire.
3 Inch X 2 Inch Primary Reducer Bushing
Item No. 32370504
Proven reliable fiberglass pipe system
3 Inch X 2 Inch Secondary Containment Reducer With 3/4 Inch Test Port (2 Piece)
Item No. 32387604
Proven reliable fiberglass pipe system
3 Inch X 2 Inch Containment Reducer Ring (3 Piece Combo)
Item No. 32469208
Installs in one half the time of conventional fiberglass pipe
4 Inch 7-1/2 Gallon Above Ground Storage Tank Spill Container With Drain - Male Threads Offset Mount
Item No. 518M-0100AC
Designed to contain small spills that occur at the fill point on aboveground storage tanks
Riser Extension 4 Inch NPT X 4 Inch Diameter X 2-1/2 Inch Installed Height
Item No. A0031-250
Designed to compensate for height variances due to tank settling and heaving
20 Inch D.O.T. Flammable Diamond Decal
Item No. SNA-DOT-FLAMMABLE-20X20
To Read Flammable With Fire Symbol
3 Inch To 2 Inch FRP Rubber Test Boot With Air Stem/Test Port
Item No. TBA-3020
Used to isolate and air test the interstitial space between the primary and secondary pipe
3 Inch x 2 Inch UPP Primary Singlewall Reducer Fitting UL-971 Listed
Item No. 09-090-063EIF-U
F Series Full-Body Taper-By-Slip Pass-Through FRP Entry Fitting With Dual Test Ports And Single Injection Port For 3 x 2 Inch FRP Pipe On Flat-Wall Single Or Doublewall Sump - (2) EP100 Required
Item No. F-32S-T-F
Bonded FRP new construction full-body termination entry fitting for singlewall or doublewall sumps.
3 Inch x 2 Inch Test Reducer With Stainless Steel Air Test Valve
Item No. PF-RA 3.6X2.4 ASS
