3 Inch x 2 Inch
3 Inch Cap 4 Inch Riser
Narrow Your Results
Mfr / Trade Name
Category - Main
Hanging Hardware
Dispenser Replacement Parts
Caps & Adapters
Containment Sumps, Monitoring Wells & Flex Connectors
Valves, Drop Tubes & Vents
Fiberglass
Flexible Piping
Semi-Rigid
Test & Temination Reducers
Type
Composition
Size
Length
Color
- List View
- Gallery View
| Page of 2 |
5/8 Inch x 8 Foot Black Hardwall Hose 3/4 Inch Male Swivel x Male Zinc Swivel Ends. UL330 And ULC Listed.
Item No. GY5/8X8MSXMS
For use with with gasoline diesel ethanol up to E10 and biodiesel up to B5 in conventional curb pump hose dispensing pump operations
3 Inch X 4 Inch Vapor Recovery Adapter Bronze
Item No. 1611AVB-1625
Poppeted Adapter designed to mate with vapor recovery elbow
5/8 Inch x 6 Foot Black Flexsteel Futura Hardwall Hose 3/4 Inch Male Swivel x 3/4 Inch Male Swivel Ends UL330 and ULC Listed (20835373)
Item No. 53232772000683
- Extra ordinary resistant to ozone cracking and wear
Vapor Adapter - Aluminum - 4 Inch Cam & Groove X 4 Inch Riser
Item No. A0076-005
Used in dual point fill systems on the vapor return line poppet design seals off the vapor path
25 Inch Wide x 24 Inch Deep x 31 Inch Tall FlexWorks 1-Piece Polyethylene UDC Under Dispenser Containment Sump With 11 Inch x 23 Inch Frame For Gasboy Dispensers
Item No. DS-1123
The DS-1123 Polyethylene Dispenser Sump is designed to be used with these dispensers Gasboy 28-1/4 inch frame 8700, 8800, 9100, and 9800 Series with 17-1/4 inch x 28 inch footprint.
25 Inch Wide x 24 Inch Deep x 31 Inch Tall FlexWorks 1-Piece Polyethylene UDC Under Dispenser Containment Sump With 11 Inch x 23 Inch Flush-Mount Frame For Gilbarco And Wayne Dispensers
Item No. DS-1123F
The DS-1123F Polyethylene Dispenser Sump is designed to be used with these dispensers Gilbarco 27 inch frame Highline 11B Series with 15-11/16 inch x 21 inch footprint. Gilbarco 27 inch frame Trimline 251, 252, 261, 262 Series with 15-11/16 inch x 27 inch footprint. Gilbarco 27 inch frame Commercial 650 Series with 15-11/16 inch x 27 inch footprint. Gilbarco 27 inch frame Highline Salesmaker Series with 15-11/16 inch x 27 inch footprint. Gilbarco 27 inch frame Salesmaker-4 Series with 15-11/16 inch x 27 inch footprint. Gilbarco Legacy Series with 15-11/16 inch x 27 inch footprint. Dresser Wayne 350, 357, 358, 360, 370 Series with 15 inch x 25-7/8 inch footprint.
Fiberglass Dispenser Sump 11 Inch X 23 Inch
Item No. DSF-1123
Engineered with thick side walls to withstand backfill and high water table forces
5/8 Inch x 4 Foot Black Hardwall Hose 3/4 Inch Male x Male Zinc Swivel Ends UL330 And ULC Listed
Item No. GY5/8X4MXMS
For use with with gasoline diesel ethanol up to E10 and biodiesel up to B5 in conventional curb pump hose dispensing pump operations
5/8 Inch x 8 Foot 6 Inch Black Hardwall Hose 3/4 Inch Male x Male Zinc Ends. UL330 And ULC Listed.
Item No. GY5/8X86MXM
For use with with gasoline, diesel, ethanol up to E10, and biodiesel up to B5 in conventional curb pump hose dispensing pump operations
5/8 Inch x 8 Foot Black Hardwall Hose 3/4 Inch Male x Male Zinc Ends. UL330 And ULC Listed.
Item No. GY5/8X8MXM
- Temperature: - 40 F to 140 F. Durable synthetic rubber cover provides extraordinary resistance to cracking fading and wear.
5/8 Inch x 8 Foot Black Hardwall Hose 3/4 Inch Male x Male Zinc Swivel Ends. UL330 And ULC Listed.
Item No. GY5/8X8MXMS
- Temperature: - 40 F to 140 F. Durable synthetic rubber cover provides extraordinary resistance to cracking fading and wear.
5/8 Inch x 8 Inch Black Hardwall Whip Hose 3/4 Inch Male x Male Zinc Swivel Ends. UL330 And ULC Listed.
Item No. GY5/8X8MXMSWHIP
For use with with gasoline diesel ethanol up to E10 and biodiesel up to B5 in conventional curb pump hose dispensing pump operations
5/8 Inch x 8 Inch Black Hardwall Whip Hose 3/4 Inch Male x Male Zinc Ends. UL330 And ULC Listed.
Item No. GY5/8X8MXMWHIP
For use with with gasoline diesel ethanol up to E10 and biodiesel up to B5 in conventional curb pump hose dispensing pump operations
5/8 Inch x 9 Inch Black Hardwall Whip Hose 3/4 Inch Male x Male Zinc Ends. UL330 And ULC Listed.
Item No. GY5/8X9MXMWHIP
For use with with gasoline diesel ethanol up to E10 and biodiesel up to B5 in conventional curb pump hose dispensing pump operations
STF Series Split Test FRP Entry Fitting For 3 Inch x 2 Inch RTIIA Pipe On Flat Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-STF-1C-32
The Split Test FRP Entry Fitting can be used to test secondary piping in new construction applications and to replace damaged or deteriorated rubber test fittings in repair applications. Permanently installed STF fitting leaves the secondary open, unlike other options which must be removed after testing. Features Versatile installation - STF fittings can be used in new construction and repair applications.100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
TPP Series Testable Pass-Thru FRP Entry Fitting For 2 Inch LCX Or 3 Inch x 2 Inch RTIIA Pipe On Flat-Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-TPP-2F-U2
The Testable Pass-Thru New Construction Fitting brings both convenience and innovation for a simple and permanent installation. Dual integrated test ports eliminates the need for a separate test boot to save time, money and space in an already crowded containment sump. Features 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Universal Fitting is designed to accommodate RTIIA and LCX pipe Allows all Primary and Secondary connections to be inside the sump, eliminating the need for any external pipe joints Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Dual Integrated Test Ports eliminates the need for a separate test boot Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
TPT Series Testable Primary Terminating FRP Entry Fitting For 3 Inch x 2 Inch RTIIA Pipe On Flat-Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-TPT-2F-32
The Testable Primary Termination New Construction Fitting brings both convenience and innovation for a simple and permanent installation. An integrated test port eliminates the need for a separate test boot to save time, money and space in an already crowded containment sump. Features 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Integrated Test Port eliminates the need for a separate test boot Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
TPT Series Testable Primary Terminating FRP Entry Fitting For 3 Inch x 2 Inch RTIIA Pipe On Round-Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-TPT-2R-32
The Testable Primary Termination New Construction Fitting brings both convenience and innovation for a simple and permanent installation. An integrated test port eliminates the need for a separate test boot to save time, money and space in an already crowded containment sump. Features 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Integrated Test Port eliminates the need for a separate test boot Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
5/8 Inch x 8 Inch Black Hardwall Whip Hose Male x Male 3/4 Inch Large Chrome Hex Nut Ends. UL330 And ULC Listed.
Item No. SNAC5/8X8MXMWHIP
UL and ULC Listed Pump Hose is suitable for use with with gasoline, diesel fuel, and oxygenated fuels up to a maximum of 10% oxygenated compounds in conventional curb pump hose dispensing operations.
