3 Inch x 2 Inch
2 Inch Slip On
Narrow Your Results
Mfr / Trade Name
Category - Main
Containment Sumps, Monitoring Wells & Flex Connectors
Valves, Drop Tubes & Vents
Fiberglass
Flexible Piping
Semi-Rigid
Test & Temination Reducers
Accessory
Enviromental & Safety
Type
Composition
- List View
- Gallery View
| Page of 1 |
3 Inch X 2 Inch Reducer Bushing Scarfed O.D. X Taper I.D.
Item No. 012030-231-7
UL 971 listed
2-3/4 Inch Wide x 10 Inch Long 8 Ounce Capacity Bacon Bomb Fuel Sampler (4849)
Item No. 14209A-EA
Used to obtain samples from storage tanks tank cars and drums. Made of brass and bronze and constructed with a heavy nickel plating and is anti-magnetic.
3 Inch X 2 Inch Primary Reducer Bushing
Item No. 32370504
Proven reliable fiberglass pipe system
3 Inch X 2 Inch Secondary Containment Reducer With 3/4 Inch Test Port (2 Piece)
Item No. 32387604
Proven reliable fiberglass pipe system
3 Inch X 2 Inch Containment Reducer Ring (3 Piece Combo)
Item No. 32469208
Installs in one half the time of conventional fiberglass pipe
2 Inch Diffuser - Slip-On Aluminum
Item No. 539AS-0200AD
Designed for installation at the bottom end of a drop tube to reduce turbulence and vapor loss during the filling operation
2 Inch Upward V Vent Polyethylene
Item No. A4103-002
Slip-on style attaches to 1.5 inch-2.0 inch pipe with 3 set screws
3 Inch To 2 Inch FRP Rubber Test Boot With Air Stem/Test Port
Item No. TBA-3020
Used to isolate and air test the interstitial space between the primary and secondary pipe
3 Inch x 2 Inch UPP Primary Singlewall Reducer Fitting UL-971 Listed
Item No. 09-090-063EIF-U
2 Inch Pressure Vacuum Vent Slip On 8 Ounce Pressure 1/2 Ounce Vacuum
Item No. 523V-1150
Factory preset and tested settings
2 Inch Pressure Vacuum Vent Slip On 3 Inch Water Column Pressure 8 Inch Water Column Vacuum
Item No. 523V-2253
Factory preset and tested settings
3 Inch x 2 Inch Test Reducer With Stainless Steel Air Test Valve
Item No. PF-RA 3.6X2.4 ASS
Aboveground Storage Tank Transition Sump
Item No. AST-2922
Transition sumps help meet environmental regulations by isolating metal piping from the soil
F Series Full-Body Taper-By-Slip Pass-Through FRP Entry Fitting With Dual Test Ports And Single Injection Port For 3 x 2 Inch FRP Pipe On Flat-Wall Single Or Doublewall Sump - (2) EP100 Required
Item No. F-32S-T-F
Bonded FRP new construction full-body termination entry fitting for singlewall or doublewall sumps.
