3 Inch Cap 4 Inch Riser
1-3/4 Inch
Narrow Your Results
Mfr / Trade Name
Category - Main
Manholes & Spill Containers
Caps & Adapters
Valves, Drop Tubes & Vents
Fiberglass
Flexible Piping
Semi-Rigid
Test & Temination Reducers
Accessory
Type
Composition
Size
Skirt Length
Length
- List View
- Gallery View
| Page of 2 |
8 Inch 104 Series Round Lay-In Cast Iron Manhole With Cast Iron Ring and 11-1/4 Inch Tall Galvanized Steel Skirt
Item No. 104A-0800
The OPW 104 Series Cast Iron Manhole is a multi-purpose manhole used to provide access to underground service station equipment, commercial equipment, and industrial equipment. A heavily ribbed cast iron cover and body ring ensure maximum load bearing capacity. Features Full-size internal diameter for maximum access and working area. Highway 20 Rated (H20). Rugged cast iron cover and body ring. Cast-in non-skid finish on cover. Sturdy, extra long steel skirt.
3 Inch X 4 Inch Vapor Recovery Adapter Bronze
Item No. 1611AVB-1625
Poppeted Adapter designed to mate with vapor recovery elbow
8 Inch Flange Gasket
Item No. 244F-01102G
Gasket to be used with the 244a series flanged Adapter
Vapor Adapter - Aluminum - 4 Inch Cam & Groove X 4 Inch Riser
Item No. A0076-005
Used in dual point fill systems on the vapor return line poppet design seals off the vapor path
1-3/4 Inch Ducted Entry Boot For Xp-175-Sc
Item No. DEB-175-SC
Entry boot can be serviced from inside the sump eliminating the need for sump excavation
1-3/4 Inch Flexible Entry Boot For Xp-175-Sc & 2 Inch Single Wall Fiberglass
Item No. FEB-175-SC
Entry boot can be serviced from inside the sump eliminating the need for sump excavation
1-3/4 Inch Xp Brass Clamshell Swivel Pipe Fittings
Item No. MS-XP-175-200
Manufactured from solid brass with two Viton O-rings protected in grooves located on the inside of the connector. E-coated clamps provide durability and corrosion resistance from gas/alcohol blends (including E85) diesel and biodiesel.
1-3/4 Inch XP Stainless Steel Clamshell Swivel Pipe Fittings
Item No. MS-XP-175-200SS
E-coated clamps provide durablilty and corrosion resitance from gas/alcohol blends (including E85) diesel and biodiesel.
STF Series Split Test FRP Entry Fitting For 3 Inch x 2 Inch RTIIA Pipe On Flat Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-STF-1C-32
The Split Test FRP Entry Fitting can be used to test secondary piping in new construction applications and to replace damaged or deteriorated rubber test fittings in repair applications. Permanently installed STF fitting leaves the secondary open, unlike other options which must be removed after testing. Features Versatile installation - STF fittings can be used in new construction and repair applications.100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
TPP Series Testable Pass-Thru FRP Entry Fitting For 2 Inch LCX Or 3 Inch x 2 Inch RTIIA Pipe On Flat-Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-TPP-2F-U2
The Testable Pass-Thru New Construction Fitting brings both convenience and innovation for a simple and permanent installation. Dual integrated test ports eliminates the need for a separate test boot to save time, money and space in an already crowded containment sump. Features 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Universal Fitting is designed to accommodate RTIIA and LCX pipe Allows all Primary and Secondary connections to be inside the sump, eliminating the need for any external pipe joints Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Dual Integrated Test Ports eliminates the need for a separate test boot Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
TPT Series Testable Primary Terminating FRP Entry Fitting For 3 Inch x 2 Inch RTIIA Pipe On Flat-Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-TPT-2F-32
The Testable Primary Termination New Construction Fitting brings both convenience and innovation for a simple and permanent installation. An integrated test port eliminates the need for a separate test boot to save time, money and space in an already crowded containment sump. Features 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Integrated Test Port eliminates the need for a separate test boot Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
TPT Series Testable Primary Terminating FRP Entry Fitting For 3 Inch x 2 Inch RTIIA Pipe On Round-Wall Sump *EP2A Or ADH-300G Adhesive Required*
Item No. PF-TPT-2R-32
The Testable Primary Termination New Construction Fitting brings both convenience and innovation for a simple and permanent installation. An integrated test port eliminates the need for a separate test boot to save time, money and space in an already crowded containment sump. Features 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Works with angled pipe entries up to 10° for job site adaptability allowing room for misalignment Integrated Test Port eliminates the need for a separate test boot Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings
3 Inch To 2 Inch FRP Rubber Test Boot With Air Stem/Test Port
Item No. TBA-3020
Used to isolate and air test the interstitial space between the primary and secondary pipe
1-3/4 Inch X 500 Foot Secondary Contained Xp Pressure/Suction Product Piping
Item No. XP-175-SC-500
No possibility of piping layer delaminating due to the layered piping construction of high-grade material
8 Inch Round Watertight White Cast Iron Bolted Monitoring Well Manhole With Cast Iron Ring And 12 Inch Tall Galvanized Steel Skirt
Item No. 65-8012-WC
- Heavy duty cast iron ring and cover with 18 gauge galvanized skirt, (2) flush-mount stainless bolts, and Buna-N gasket.
3 Inch X 4 Inch Vapor Recovery Adapter For 4 Inch Riser
Item No. 1611AV-1620
Poppeted Adapter designed to mate with vapor recovery elbow
8 Inch 104AOW Series Round Bolt-Down Watertight Cast Iron Monitoring Well Manhole With Cast Iron Ring and 11-1/4 Inch Tall Steel Skirt
Item No. 104AOW-0800
The OPW 104AOW Series Monitoring/Observation Well Manhole is designed to be installed at grade level over a slotted PVC monitoring well where limited access and clear identification are essential. A heavily ribbed cast iron cover and body ring ensure maximum load bearing capacity. Ring gasket prevents surface water contamination. Features DO NOT FILL Graphic Warning Statement is permanently cast into cover with black equilateral triangle inset into a white painted background in accordance with API Recommended Practices 1615. Secure cover with two recessed, self-aligning stainless steel bolts and O-rings to secure cover to the body ring. Gasket located in the ring prevents contamination from rain water or during washdown. Full-size internal diameter for maximum access and working area. Highway 20 Rated (H20). Rugged cast iron cover and body ring. Cast-in non-skid finish on cover. Sturdy, extra long steel skirt.
3 Inch x 2 Inch UPP Primary Singlewall Reducer Fitting UL-971 Listed
Item No. 09-090-063EIF-U
Secondary Test Boot For Xp-175-Sc Pipe
Item No. STB-175
Boots are made using fuel-resistant nitrile rubber
3 Inch X 2 Inch Primary Reducer Bushing
Item No. 32370504
Proven reliable fiberglass pipe system
