3-1/2 Inch
1-1/2 Inch x 2 Inch
Narrow Your Results
Mfr / Trade Name
Category - Main
Caps & Adapters
Containment Sumps, Monitoring Wells & Flex Connectors
Valves, Drop Tubes & Vents
Fiberglass
Flexible Piping
Semi-Rigid
Test & Temination Reducers
Enviromental & Safety
Type
Composition
Size
Length
- List View
- Gallery View
| Page of 1 |
3 Inch X 2 Inch Reducer Bushing Scarfed O.D. X Taper I.D.
Item No. 012030-231-7
UL 971 listed
3-1/2 Inch Id X 30 Inch Long Flex Containment Boot
Item No. 1001
Clamped directly to 3 inch secondary pipe used over 2 inch primary pipe
2-3/4 Inch Wide x 10 Inch Long 8 Ounce Capacity Bacon Bomb Fuel Sampler (4849)
Item No. 14209A-EA
Used to obtain samples from storage tanks tank cars and drums. Made of brass and bronze and constructed with a heavy nickel plating and is anti-magnetic.
26 Inch Watertight Access Cover With Gasket And Locking Ring (C700236)
Item No. 26INCHCOMPLETE
1-1/2 Inch Female NPT x 2 Inch Shorty Offset Adapter
Item No. 303-1520
Compensates for misalignment of dispenser suction stub and dispenser boxes.
3 Inch X 2 Inch Primary Reducer Bushing
Item No. 32370504
Proven reliable fiberglass pipe system
3 Inch X 2 Inch Secondary Containment Reducer With 3/4 Inch Test Port (2 Piece)
Item No. 32387604
Proven reliable fiberglass pipe system
3 Inch X 2 Inch Containment Reducer Ring (3 Piece Combo)
Item No. 32469208
Installs in one half the time of conventional fiberglass pipe
3 Inch To 2 Inch FRP Rubber Test Boot With Air Stem/Test Port
Item No. TBA-3020
Used to isolate and air test the interstitial space between the primary and secondary pipe
12-1/2 Foot x 300 Foot Filter Fabric
Item No. TYPAR-3401
Meets AASHTO M288 class 3 requirements
3 Inch x 2 Inch UPP Primary Singlewall Reducer Fitting UL-971 Listed
Item No. 09-090-063EIF-U
Replacement 26 Inch Diameter Access Cover Gasket - 7 Foot Overall Length (C430079)
Item No. 26INCHWTGASKET
7 Foot Overall Length
3 Inch x 2 Inch Test Reducer With Stainless Steel Air Test Valve
Item No. PF-RA 3.6X2.4 ASS
F Series Full-Body Taper-By-Slip Pass-Through FRP Entry Fitting With Dual Test Ports And Single Injection Port For 3 x 2 Inch FRP Pipe On Flat-Wall Single Or Doublewall Sump - (2) EP100 Required
Item No. F-32S-T-F
Bonded FRP new construction full-body termination entry fitting for singlewall or doublewall sumps.
