1/4 Pint
1-1/2 Inch x 1-1/2 Inch
Narrow Your Results
Mfr / Trade Name
Category - Main
Manholes & Spill Containers
Caps & Adapters
Valves, Drop Tubes & Vents
Fiberglass
Flexible Piping
Semi-Rigid
Test & Temination Reducers
Thread Sealant
Type
Composition
Size
Fuel Type
Gallon Size
Color
Application
- List View
- Gallery View
Page of 1 |
3 Inch X 2 Inch Reducer Bushing Scarfed O.D. X Taper I.D.
Item No. 012030-231-7
UL 971 listed
1-1/2 Inch Female NPT x 1-1/2 Inch Shorty Offset Adapter
Item No. 303-1515
Compensates for misalignment of dispenser suction stub and dispenser boxes.
3 Inch X 2 Inch Primary Reducer Bushing
Item No. 32370504
Proven reliable fiberglass pipe system
3 Inch X 2 Inch Secondary Containment Reducer With 3/4 Inch Test Port (2 Piece)
Item No. 32387604
Proven reliable fiberglass pipe system
3 Inch X 2 Inch Containment Reducer Ring (3 Piece Combo)
Item No. 32469208
Installs in one half the time of conventional fiberglass pipe
15 Gallon AST Remote Fill Spill Containment With Adjustable Legs Base Drain Valve Single 4 Inch Opening With (1) 3 Inch Booted Entry White Powder Coat
Item No. 6211R-151B3LD
Easy install a 4 inch flexible boot allows a quick connect to the remote fill and vapor lines
20 Gallon 3 Inch AST Remote Fill Spill Containment White Steel Construction With Adjustable Legs Base Drain Valve And (1) 3 Inch Booted Entry Holes
Item No. 6211R-201B3LD
12-Gauge Epoxy-Powder Coated Steel. Welded-Hinge Lockable Hatch
3 Inch To 2 Inch FRP Rubber Test Boot With Air Stem/Test Port
Item No. TBA-3020
Used to isolate and air test the interstitial space between the primary and secondary pipe
1/4 Pint Brush Gasoila Thread Sealant Soft-Set With Ptfe
Item No. SS04
Soft-setting, non-toxic, PTFE paste
1/4 Pint Brush-Top Gasoila E-Seal Soft-Set Thread Sealant With PTFE
Item No. GE04
Non-hardening non-toxic viscous soft-setting opaque dark green smooth paste with PTFE designed for ethanol-blended gasoline including E10 and E85.
3 Inch x 2 Inch UPP Primary Singlewall Reducer Fitting UL-971 Listed
Item No. 09-090-063EIF-U
F Series Full-Body Taper-By-Slip Pass-Through FRP Entry Fitting With Dual Test Ports And Single Injection Port For 3 x 2 Inch FRP Pipe On Flat-Wall Single Or Doublewall Sump - (2) EP100 Required
Item No. F-32S-T-F
Bonded FRP new construction full-body termination entry fitting for singlewall or doublewall sumps.
3 Inch x 2 Inch Test Reducer With Stainless Steel Air Test Valve
Item No. PF-RA 3.6X2.4 ASS