8 Inch
1-1/2 Inch
Narrow Your Results
Mfr / Trade Name
Category - Main
Dispenser Maintenance
Manholes & Spill Containers
Containment Sumps, Monitoring Wells & Flex Connectors
Valves, Drop Tubes & Vents
Double Trac
DEF-Trac
Flexible Piping
Semi-Rigid
Accessory
Enviromental & Safety
Type
Composition
Size
Skirt Length
Micron Size
Fuel Type
Length
Inlet
Application
Pressure Differential
Voltage
- List View
- Gallery View
| Page of 3 |
8 Inch 104 Series Round Lay-In Cast Iron Manhole With Cast Iron Ring and 11-1/4 Inch Tall Galvanized Steel Skirt
Item No. 104A-0800
The OPW 104 Series Cast Iron Manhole is a multi-purpose manhole used to provide access to underground service station equipment, commercial equipment, and industrial equipment. A heavily ribbed cast iron cover and body ring ensure maximum load bearing capacity. Features Full-size internal diameter for maximum access and working area. Highway 20 Rated (H20). Rugged cast iron cover and body ring. Cast-in non-skid finish on cover. Sturdy, extra long steel skirt.
1-1/2 Inch Female NPT Low Profile Replacement Shear Top For Double-Poppet 10BFP-5726 Valve
Item No. 10FTP-5701
Female National Pipe Thread (NPT) top connection
1-1/2 Inch Female NPT Replacement Shear Top For Single-Poppet 10BF-5725 Valve
Item No. 10RFT-5750
Replacement top for 10BF-5725
1-1/2 Inch Male NPT Replacement Shear Top For Single-Poppet 10BM-5825 Valve
Item No. 10RMT-5850
1-1/2 Inch Male NPT Replacement Shear Top For Double-Poppet 10RMTP-5851 Valve
Item No. 10RMTP-5851
Replacement top for 10BHMCP-5830
2-3/4 Inch Wide x 10 Inch Long 8 Ounce Capacity Bacon Bomb Fuel Sampler (4849)
Item No. 14209A-EA
Used to obtain samples from storage tanks tank cars and drums. Made of brass and bronze and constructed with a heavy nickel plating and is anti-magnetic.
1-1/2 Inch Threaded Double Outlet Vent Female NPT
Item No. 155-0400AV
Aluminum t-style vent used primarily on small fuel oil storage tanks
1-1/2 Inch Anti-Syphon Valve 5 To 10 Foot Head Pressure
Item No. 199ASV-2150
Factory-adjusted hydrostatic head pressure settings
1 1/2 Inch Buna Union Check Valve With Screen
Item No. 200AS-15
Easily inserted onto existing union fittings in suction systems
1-1/2 Inch Full Port Two-Way Ball Valve
Item No. 21BV-0150
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
1-1/2 Inch Open Vent Upward Aluminum
Item No. 23-0044
Installed on the top of vent pipes from underground or aboveground fuel storage tanks always open to the atmosphere to allow any pressure or vacuum in the tank to vent
8 Inch Flange Gasket
Item No. 244F-01102G
Gasket to be used with the 244a series flanged Adapter
1-1/2 Inch Swing Check Valve - Threaded Brass
Item No. 246A-0100AV
Designed to prevent backflow in horizontal piping systems. Swing check valve allow liquid to flow in a single direction
2 Inch Singlewall Or 1-1/2 Inch Doublewall UPP Entry Boot UL-971 Listed
Item No. 303-063-EIF-U
1-1/2 Inch Single Poppet Foot Valve
Item No. 334-0300AV
Installed at the inlet of a suction line bottom of the storage tank
1-1/2 Inch Double Poppet Foot Valve
Item No. 335A-0100AV
Installed at the inlet of a suction line normally at the bottom of the storage tank as a prime holding valve.
1-1/2 Inch Full Port Stainless Steel Locking Ball Valve
Item No. 691BSS-07001V
Full port valve is used for liquid or air service handling with manual open / close in quick quarter-turn handle operartion
1-1/2 Inch Vertical Check Valve With Shear Groove (E85)
Item No. 70-0070
OPW Vertical Check Valves are installed the inlet to the pump in the dispenser island to maintain prime
