Veeder Root
RDM Electronics
Narrow Your Results
Mfr / Trade Name
Category - Main
Pressurized Line Leak Detection
Replacement Parts & Spare Modules
Sensor
Submersible Pumps, Motors & Leak Detectors
Type
Model Number
- List View
- Gallery View
| Page of 1 |
120 VOlt IQ Control Box
Item No. 880-051-1
Easy to use and easy to install control for manifold pumps
Non-Discriminating Piping Sump Sensor With 12 Foot Cable
Item No. 794380-208
Used On TLS-350 and TLS-450
Single-Point Single-Float Hydrostatic Interstitial Reservoir Sensor With 12 Foot Cable And Vented Riser Cap Assembly For Brine-Filled Doublewall Tanks
Item No. 794380-301
The Single-Point Hydrostatic Reservoir Sensor accurately detects fluid level change in the reservoir and interstice of a double wall storage tank. The Single-Point has one float and can be used in low groundwater locations. With the Single-Point Hydrostatic Sensor if either an inner or outer leak occurs the brine level decreases and a low-level alarm is triggered. If an inner-wall leak occurs, the brine seeps into the tank triggering a fuel alarm, or if the outer wall leaks, the brine seeps out of the tank interstice triggering a fuel alarm. Key Features Clear plastic housing for visual inspection or float operations Leak in inner or outer wall triggers a low level alarm in low groundwater areas Meets California&rsquos requirement for secondary space monitoring for tanks as required by AB 2481
Single Float Non-Discriminating Stand Alone Sensor With Dispenser Control Interface
Item No. 847970-001
Connects directly to the dispenser wiring, no console required. Mounting brackets are required 330020-012. CUL Listed.
Single Float Non-Discriminating Stand Alone Sensor With Dispenser Control Interface
Item No. 847990-001
Connects directly to the dispenser wiring, no console required. Mounting brackets are required 330020-012. UL Listed.
Pressurized Line Leak Detector With Swift Check Valve
Item No. 848480-003
Pressurized Line Leak Detection (PLLD) provides automatic 3.0 GPH hourly line testing
