Veeder Root
Omntec
Narrow Your Results
Category - Main
Pressurized Line Leak Detection
Replacement Parts & Spare Modules
Sensor
Submersible Pumps, Motors & Leak Detectors
Type
Fuel Type
Model Number
- List View
- Gallery View
| Page of 1 |
Adjustable Functional Element For AG Pumps
Item No. 323-002-5
Repair part for Red Jacket submersible turbines
Paper Roll Shaft (Spindle)
Item No. 329211-001
Replacement paper roll shaft for TLS-300 and 350 series consoles
120 VOlt IQ Control Box
Item No. 880-051-1
Easy to use and easy to install control for manifold pumps
Adjustable Functional Element For Non Ag Pumps
Item No. 323-001-5
Repair part for Red Jacket submersible turbines
Dual-Point Single-Float Hydrostatic Interstitial Reservoir Sensor With 12 Foot Cable And Vented Riser Cap Assembly For Brine-Filled Doublewall Tanks
Item No. 794380-303
The Dual-Point Hydrostatic Reservoir Sensor accurately detects fluid level change in the reservoir and interstice of a double wall storage tank. The Dual-Point Hydrostatic Reservoir Sensor is ideal for high groundwater areas, and can differentiate between a high level alarm condition and a low level alarm condition. If an inner-wall leak occurs, the brine seeps into the tank triggering a low-level alarm, if an outer wall leak occurs, fluid seeps into the interstice triggering a high-level alarm. Key Features Withstands removal from reservoir several times a year without sensor damage Clear plastic housing for visual inspection or float operations Rests in salt brine solution of up to 30% calcium chloride Meets California&rsquos requirement for secondary space monitoring for tanks as required by AB 2481
Position Sensitive Pan / Sump Sensor 12 Foot Cable E85 Approved
Item No. 794380-323
Used On TLS-350 and TLS-450
Pressurized Line Leak Detector Without Swift Check Valve
Item No. 848480-001
Pressurized line leak detector (PLLD) provides automatic 3.0 GPH hourly and optional 0.2 GPH and 0.1 GPH precision line leak detection for TLS-350 series systems to tank mapping, business inventory reconciliation, and variance analysis. It also features inventory, leak
12 Inch Magnetostrictive Dual-Float Discriminating Level Indicating Containment Sump Sensor With 10 Foot Cable
Item No. 857080-111
The Veeder Root Mag Sump Sensor quickly and accurately detects the presence and the amount of water and/or fuel in the containment sump or dispenser pan. Using proven magnetostrictive technology to detect hydrocarbons or water, the Mag Sump Sensor produces fast reaction and recovery times, which eliminates costly and unwarranted service calls and sensor replacements. Features Detect and pinpoint fluid type in containment areas to allow for smart dispatching Increase site uptime in locations where shutdown is not required if only water is detected Single module for two- and three-wire sensors provides flexibility for users to monitor multiple sensor types High-grade polymer housing provides enhanced corrosion resistance and fuel compatibility Robust and rugged screw-in connector allows simplified installation and easy inspection Alarm notification upon presence of liquid in the containment area and/or dispenser pan Alarm conditions indicated by audible alarm with displayed and printed message on the console Record of past alarms available as part of the Alarm History Report with the TLS-450PLUS and TLS4 Series consoles
DPLLD Digital Pressurized Line Leak Detector Without Swift Check Valve
Item No. 859080-001
Pressurized line leak detection (PLLD) provides automatic 3.0 GPH hourly line testing
