Veeder Root
Franklin Electric
Narrow Your Results
Mfr / Trade Name
Category - Main
Probe Float Kit
Replacement Parts & Spare Modules
Sensor
Tank Probe
Hanging Hardware
Manholes & Spill Containers
Caps & Adapters
Containment Sumps, Monitoring Wells & Flex Connectors
Submersible Pumps, Motors & Leak Detectors
Valves, Drop Tubes & Vents
Flexible Piping
Accessory
Type
Composition
Size
Tank Diameter
Bury Depth
Riser Length
Fuel Type
Length
Gallon Size
Horse Power
Color
Application
- List View
- Gallery View
Page of 3 |
4 Inch Standard Mag Probe Water Float Kit For Diesel
Item No. 330424-003
Use with standard mag probe
Defender Series CARB Approved AGB Compatible Poppeted Coaxial Overfill Prevention Valve With 6-1/2 Foot Top Drop Tube And 10 Foot Bottom Drop Tube
Item No. 708693924
Magnetically-coupled actuator system provides positive shutoff at a broad range of flow rates and eliminates any pentetrations in the valve making it both vapor and leak tight.
Flexible Ducting Connector With Clamps
Item No. DCT-400-F
Works on OPW AXP40 and Franklin DCT-400 Ducting
Flexible Entry Boot For R-400-D & 4 Inch Single Wall Fiberglass
Item No. FEB-400-R
Entry boot can be serviced from inside the sump eliminating the need for sump excavation
4 Inch Fill Swivel Adapter - Brass
Item No. SWF-100-B
Protects against fuel spills in the event of a piping break
4 Inch Vapor Swivel Adapter - Brass
Item No. SWV-101-B
Prevents vapor leaks at fill adapter due to loosening from riser during tank filling
4 Inch Diesel Float Kit
Item No. TSP-IDF4
Contains a Product and Water Float to be installed on the shaft of an LLx Mag Probe to monitor product and water levels in tank.
4 Inch Gasoline And Ethanol Blend Phase Separation Float Kit
Item No. TSP-IGF4P
Contains a Product and Water/Phase Separation Float to be installed on the shaft of an LLx Mag Probe to monitor product and water levels in tank.
4 Inch Hydrostatic Sensor Vented Locking Riser Cap Installation Kit - Spare Replacement
Item No. TSP-KV4
Cap is compression-fit into a 4 inch riser opening on double wall fiberglass tank resevoir via a lever.
6 Foot ENVIRO-LOC EVR Platinum Phase II Balance Vapor Recovery Hose With Venturi And Anti-Stretch Safety Cable
Item No. VDVP-EVR-072
ENVIRO-LOC EVR Platinum Balance Hose has a patented, variable design venturi (VDV) that allows for highest flow rates and best results in reducing flow collect ISD alarms. This uniquely designed hose uses an Anti-Stretch cable to reduce recoil during a drive off and eliminate the hose stretch putting the end pull diretctly on the breakaway.
12 Inch ENVIRO-LOC EVR Platinum Phase II Balance Vapor Recovery Hose With Anti-Stretch Safety Cable Without Venturi
Item No. VSTAP-EVR-012
ENVIRO-LOC EVR Platinum Balance Hose design has no vapor tubing to stretch or kink, which can block the vapor path and trigger a system alarm.
4 Foot ENVIRO-LOC EVR Platinum Phase II Balance Vapor Recovery Hose With Anti-Stretch Safety Cable Without Venturi
Item No. VSTAP-EVR-048
ENVIRO-LOC EVR Platinum Balance Hose design has no vapor tubing to stretch or kink, which can block the vapor path and trigger a system alarm.
6 Foot ENVIRO-LOC EVR Platinum Phase II Balance Vapor Recovery Hose With Anti-Stretch Safety Cable Without Venturi
Item No. VSTAP-EVR-072
- Certifications: UL Listed, California Air Resources Board (CARB) certified (Enhanced Vapor Recovery Specifications), California OSHA approved, California Department of Measurement Standards, California State Fire Marshal, California State Water Board
2 HP AG Variable Speed 90 Inch-151 Inch Intelligent Submersible Turbine Pump With MagShell Without Riser (ISTMR2-00)
Item No. 402731901
Variable speed variable length (90 - 151 inches) with MagShell motor. Includes standard model check valve (40 psi relief / 35 psi reset for MLD and TS-LS300)