Extractor Valve
Underground Storage Tank Equipment
Narrow Your Results
Mfr / Trade Name
Category - Main
Valves, Drop Tubes & Vents
Size
Inlet
- List View
- Gallery View
Page of 2 |
1-1/2 Inch Open Vent Upward Aluminum
Item No. 23-0044
Installed on the top of vent pipes from underground or aboveground fuel storage tanks always open to the atmosphere to allow any pressure or vacuum in the tank to vent
4 Inch X 2 Inch X 4 Inch Extractor Tee No Cage (E85 Approved)
Item No. 233-4420
Threads into 4 inch NPT opening on an underground storage tank
4 Inch X 2 Inch X 2 Inch X 4 Inch Extractor Cross No Cage (E85 Approved)
Item No. 233-4422
Threads into 4 inch NPT opening on an underground storage tank
4 Inch X 3 Inch X 4 Inch Extractor Tee No Cage (E85 Approved)
Item No. 233-4430
Threads into 4 inch NPT opening on an underground storage tank
4 Inch X 3 Inch X 2 Inch X 4 Inch Extractor Cross No Cage (E85 Approved)
Item No. 233-4432
Threads into 4 inch NPT opening on an underground storage tank
4 Inch X 3 Inch X 3 Inch X 4 Inch Extractor Cross No Cage (E85 Approved)
Item No. 233-4433
Threads into 4 inch NPT opening on an underground storage tank
Test Plug For 233 Series Extractors
Item No. 233VP-6046
Incorporates an O-ring above the threads (on the plug) to isolate the tank from the vent piping system during tan test
2 Inch Updraft Vent
Item No. 354-0200AV
Open vent design used on underground and above ground tanks
4 Inch Updraft Vent
Item No. 354-0400AV
Open vent design used on under ground and above ground tanks
2 Inch Slip-On Adapter For Series 523 Vents
Item No. 523SA-1002
Converts a 523V and 623V vent to a 2 inch slip on vent
3 Inch Slip-On Adapter For Series 523 Vents
Item No. 523SA-1003
Converts a 523V and 623V ent to a 3 inch slip on vent
Tank Bottom Protectors 4 Inch Evr
Item No. 6111-1400
Installed at the bottom of overfill valve or drop tube
4 Inch Tank Bottom Protector
Item No. 61TP-2398
Installed at the bottom of overfill prevention valves or drop tubes to prevent the tank from damage or leakage at the fill point due to manual tank gauging & erosion from dirt or debris
3 Inch Carb EVR Certified Pressure Vacuum Vent, 3 Inch Water Column Pressure, 8 Inch Water Column Vacuum, Thread On
Item No. 723V-3203
Factory preset and tested settings
Extractor Tee Fitting & 2 Inch Cage 4 Inch X 4 Inch X 2 Inch
Item No. A0079-120
Consists of a cast iron extractor body and an internal bar style cage
2 Inch NPT Thread-On Aluminum Pressure Vacuum Vent 2-1/2 - 6 Inch Range Water Column Pressure 6 - 10 Inch Range Vacuum
Item No. A0084-038
Is an internal pressure vacuum valve that restricts vaopr escape during product drops.
2 Inch Upward V Vent Polyethylene
Item No. A4103-002
Slip-on style attaches to 1.5 inch-2.0 inch pipe with 3 set screws