Pipe Cap
Underground Storage Tank Equipment
Narrow Your Results
Mfr / Trade Name
Category - Main
Caps & Adapters
Accessory
Composition
Size
Tank Opening
Riser Length
- List View
- Gallery View
| Page of 1 |
4 Inch Probe Cap With 3/8 Inch Grommet
Item No. 116M-0375
Drilled and tapped to accept 3/8 Inch wire grommet to secure an electronic tang gauge probe in a tank riser pipe
Aluminum 4 Inch Tank Monitor Cap With 3/8 Inch, EVR Approved
Item No. 305XP-0100ACEVR
Aluminum 4 inch threaded port hole 3/8 inch, 2 pound
4 Inch EVR Approved Tank Monitor Cap With 1/2 Inch Threaded Porthole And Cable Connector
Item No. 305XP-1200ACEVR
Used for fill ports and access to leak detection on fuel storage tanks
4 Inch NPT Pipe Cap - Aluminum
Item No. 412-40
Convenient crossbar for easy removal and installation
4 Inch Extractor Pipe Cap - Brass
Item No. 578-0100AC
Used as a cover for the extractor / float vent valve overfill system
4 Inch Nickel Plated E85 EVR Approved Fill Swivel Adapter
Item No. 61SALP-MA
The 61SA Swivel Adapter mates with 4 top-seal delivery elbows and features a top section that rotates with hose movement while the bottom section remains securely in place maintaining seal integrity
4 Inch Female Bar Style Extractor Pipe Cap
Item No. A0585-003
Designed to thread directly on the extractor access pipes
Gasket For 61SALP, 61VSA, And 61SS Adapters
Item No. H09039M
Also a replacemnet for 1611AV and 633T
4 Inch Fill Swivel Adapter - Brass
Item No. SWF-100-B
Protects against fuel spills in the event of a piping break
4 Inch Threaded Pipe Cap Duratuff With Nitrile Seal
Item No. 116-7085
Provides access to ball float extractor fitting
4 Inch Bronze Swivel Fill Adapter
Item No. 61SALP-1020-EVR
The 61SA Swivel Adapter mates with 4 top-seal delivery elbows and features a top section that rotates with hose movement while the bottom section remains securely in place maintaining seal integrity
4 Inch EVR Approved Aluminum Tank Monitor Cap With 3/8 Inch Threaded Port Hole And 3/8 Inch Cable Connector
Item No. 305XP-0200ACEVR
Tank monitor caps are installed on tank monitor riser pipe adapters to keep water and debris out while providing a liquid tight opening for the probe wire to pass through.
4 Inch Cam And Groove x 4 Inch Female NPSM Brass Top-Seal Fill Swivel Adapter
Item No. A0030-124S
The Model A0030-124S Swivel Fill Adapter typically installs on the tank fill riser of a Dual-Point Phase I Vapor Recovery system for underground fuel storage tanks. The top of the adapter rotates 360 degrees in either direction during routine fuel deliveries. The base of the adapter is stationary preventing accidental loosening from the tank fill riser thread connection while eliminating potential vapor leaks and damage to the drop tube. The adapter is designed for use with Top-Seal type fill caps.
![Fill Cap 4 Inch For Tank Probe [Evr]](https://shop.sourcena.com/lowres/detail/A0097-010.jpg "Fill Cap 4 Inch For Tank Probe [Evr]")
Fill Cap 4 Inch For Tank Probe [Evr]
Item No. A0097-010
Provides vapor tight integrity eliminating fugitive emissions
All-In-One Fill Swivel Adapter Kit For 5 Gallon PHIL-TITE And EBW Series Below-Grade Spill Containers With CARB EVR Stainless Fill Adapter, 4 Inch Top Seal Cap, And 5 Inch Riser Nipple
Item No. 70541201
The fill swivel adapter helps prevent leaks caused by constant fill delivery elbow movement on the riser adapter. The top section rotates during normal deliveries, preventing the bottom section from loosening on the riser pipe which could cause a vapor or product leak around the adapter.
