Extractor Valve
Underground Storage Tank Equipment
Narrow Your Results
Mfr / Trade Name
Valves, Drop Tubes & Vents
- List View
- Gallery View
Page of 1 |
4 Inch X 2 Inch X 4 Inch Extractor Tee No Cage (E85 Approved)
Item No. 233-4420
Threads into 4 inch NPT opening on an underground storage tank
4 Inch X 2 Inch X 2 Inch X 4 Inch Extractor Cross No Cage (E85 Approved)
Item No. 233-4422
Threads into 4 inch NPT opening on an underground storage tank
4 Inch X 3 Inch X 4 Inch Extractor Tee No Cage (E85 Approved)
Item No. 233-4430
Threads into 4 inch NPT opening on an underground storage tank
4 Inch X 3 Inch X 2 Inch X 4 Inch Extractor Cross No Cage (E85 Approved)
Item No. 233-4432
Threads into 4 inch NPT opening on an underground storage tank
4 Inch X 3 Inch X 3 Inch X 4 Inch Extractor Cross No Cage (E85 Approved)
Item No. 233-4433
Threads into 4 inch NPT opening on an underground storage tank
Test Plug For 233 Series Extractors
Item No. 233VP-6046
Incorporates an O-ring above the threads (on the plug) to isolate the tank from the vent piping system during tan test
Overfill Prevention Valve Drill Fixture Tool A1100
Item No. 566675
Aligns holes for drilling to ensure vapor-tight seal
Extractor Tee Fitting & 2 Inch Cage 4 Inch X 4 Inch X 2 Inch
Item No. A0079-120
Consists of a cast iron extractor body and an internal bar style cage
Fill/Vapor Adapter Wrench
Item No. A0081-001
Use to install and remove EMCO Fill and Vapor Adapters with octagonal bases and the 494096 Riser Seal.
4 Inch X 4 Inch X 2 Inch NPT Extractor Vent Valve Without Cage
Item No. 31040011
E-Coated bodies are fully compatible for alcohol/gas blends and biodiesel
1-1/2 Inch And 2 Inch Extractor Wrench Tool
Item No. 89-0044
The OPW 89 Extractor Wrench is designed to install or remove OPW 53VML and 30MV Ball Float Vent Valves or OPW 233VP and 233VMP Test Plugs in OPW 233, 233V, and 233VM Extractor Fittings
Swivel Wrench For 61SA Fill And 61VSA Vapor Adaptors
Item No. 61SA-TOOL
The 61SA-TOOL is a wrench designed to thread on the 61SA Fill and 61VSA vapor Adapters. The OPW 61SA-TOOL Adapter installation tool is required to insure proper installation of OPW rotatable swivel Adapters thread-on spill containers fill and vapor Adapters TC-400 torque cap for pipe nipples and threaded riser Adapters as per EVR requirements. The 61SA-TOOL includes provisions for the use of a torque wrench to facilitate accurate installation and testing