Drop Tube
Underground Storage Tank Equipment
Narrow Your Results
Mfr / Trade Name
Category - Main
Valves, Drop Tubes & Vents
Accessory
Type
Composition
Size
Length
Inlet
- List View
- Gallery View
Page of 2 |
1-1/2 Inch Open Vent Upward Aluminum
Item No. 23-0044
Installed on the top of vent pipes from underground or aboveground fuel storage tanks always open to the atmosphere to allow any pressure or vacuum in the tank to vent
2 Inch Updraft Vent
Item No. 354-0200AV
Open vent design used on underground and above ground tanks
4 Inch Updraft Vent
Item No. 354-0400AV
Open vent design used on under ground and above ground tanks
2 Inch Slip-On Adapter For Series 523 Vents
Item No. 523SA-1002
Converts a 523V and 623V vent to a 2 inch slip on vent
3 Inch Slip-On Adapter For Series 523 Vents
Item No. 523SA-1003
Converts a 523V and 623V ent to a 3 inch slip on vent
2 Inch Diffuser - Slip-On Aluminum
Item No. 539AS-0200AD
Designed for installation at the bottom end of a drop tube to reduce turbulence and vapor loss during the filling operation
Overfill Prevention Valve Drill Fixture Tool A1100
Item No. 566675
Aligns holes for drilling to ensure vapor-tight seal
Tank Bottom Protectors 4 Inch Evr
Item No. 6111-1400
Installed at the bottom of overfill valve or drop tube
4 Inch X 15 Foot Straight Drop Tube
Item No. 61T-7368
Installed in the fill riser pipe to an underground storage tank
4 Inch X 13 Foot Coaxial Fill Vapor Recovery Drop Tube
Item No. 61TC-7270
The 61TC coaxial drop tube replaces the 61T conventional drop tube when Stage I vapor recovery is required and a vapor recovery riser pipe is not available on the tank or would require excavation to the top of the tank
4 Inch X 16 Foot Coaxial Fill Vapor Recovery Drop Tube
Item No. 61TC-7272
The 61TC coaxial drop tube replaces the 61T conventional drop tube when Stage I vapor recovery is required and a vapor recovery riser pipe is not available on the tank or would require excavation to the top of the tank
4 Inch X 13 Foot Poppeted Coaxial Fill Drop Tube
Item No. 61TCP-3800
Poppeted coaxial fill drop tube is similar to the 61TC but is spring-loaded
4 Inch Tank Bottom Protector
Item No. 61TP-2398
Installed at the bottom of overfill prevention valves or drop tubes to prevent the tank from damage or leakage at the fill point due to manual tank gauging & erosion from dirt or debris
3 Inch Carb EVR Certified Pressure Vacuum Vent, 3 Inch Water Column Pressure, 8 Inch Water Column Vacuum, Thread On
Item No. 723V-3203
Factory preset and tested settings
Fill/Vapor Adapter Wrench
Item No. A0081-001
Use to install and remove EMCO Fill and Vapor Adapters with octagonal bases and the 494096 Riser Seal.
2 Inch NPT Thread-On Aluminum Pressure Vacuum Vent 2-1/2 - 6 Inch Range Water Column Pressure 6 - 10 Inch Range Vacuum
Item No. A0084-038
Is an internal pressure vacuum valve that restricts vaopr escape during product drops.
2 Inch Upward V Vent Polyethylene
Item No. A4103-002
Slip-on style attaches to 1.5 inch-2.0 inch pipe with 3 set screws