Ball Valve
Underground Storage Tank Equipment
Narrow Your Results
Mfr / Trade Name
Category - Main
Valves, Drop Tubes & Vents
Type
Composition
Size
Tank Diameter
Bury Depth
Length
Inlet
- List View
- Gallery View
Page of 4 |
1-1/2 Inch Full Port Two-Way Ball Valve
Item No. 21BV-0150
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
2 Inch Full Port 2-Way Brass Ball Valve
Item No. 21BV-0200
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
3 Inch Full Port Two-Way Ball Valve
Item No. 21BV-0300
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
1-1/2 Inch Open Vent Upward Aluminum
Item No. 23-0044
Installed on the top of vent pipes from underground or aboveground fuel storage tanks always open to the atmosphere to allow any pressure or vacuum in the tank to vent
3/4 Inch Single Poppet Foot Valve
Item No. 334-0100AV
Installed at the inlet of a suction line bottom of the storage tank
1 Inch Single Poppet Foot Valve
Item No. 334-0200AV
Installed at the inlet of a suction line bottom of the storage tank
1-1/2 Inch Single Poppet Foot Valve
Item No. 334-0300AV
Installed at the inlet of a suction line bottom of the storage tank
2 Inch Single Poppet Foot Valve
Item No. 334-0400AV
Installed at the inlet of a suction line bottom of the storage tank
1-1/2 Inch Double Poppet Foot Valve
Item No. 335A-0100AV
Installed at the inlet of a suction line normally at the bottom of the storage tank as a prime holding valve.
2 Inch Double Poppet Foot Valve
Item No. 335A-0200AV
Installed at the inlet of a suction line normally at the bottom of the storage tank as a prime holding valve.
2 Inch Updraft Vent
Item No. 354-0200AV
Open vent design used on underground and above ground tanks
4 Inch Updraft Vent
Item No. 354-0400AV
Open vent design used on under ground and above ground tanks
2 Inch Slip-On Adapter For Series 523 Vents
Item No. 523SA-1002
Converts a 523V and 623V vent to a 2 inch slip on vent
3 Inch Slip-On Adapter For Series 523 Vents
Item No. 523SA-1003
Converts a 523V and 623V ent to a 3 inch slip on vent
Overfill Prevention Valve Drill Fixture Tool A1100
Item No. 566675
Aligns holes for drilling to ensure vapor-tight seal
4 Inch Coaxial Overfill Prevention Valve For Tanks Up To 8 Foot
Item No. 61SOC-4001
Used for coaxial fill applications tanks equipped with single product / vapor return connection
4 Inch Coaxial Overfill Prevention Valve For Tanks Up To 10 Foot
Item No. 61SOC-4011
Used for coaxial fill applications tanks equipped with single product / vapor return connection
Float Kit For The 61So And 71So Series Overfill Prevention Valve
Item No. 61SOK-0001
Nitrile rubber, closed cell foam construction
4 Inch Dual Point Carb Approved Overfill Prevention Valve (E85 M85) (Does Not Include Lower Drop Tube)
Item No. 61SOM-412C-EVR
For tanks up to 10 Foot
4 Inch Coaxial Poppeted Overfill Valve For Tanks Up To 8 Foot - Carb Approved
Item No. 61SOP-4002
Used in poppeted coaxial fill applications where C.A.R.B. requirements have been adopted