Underground Storage Tank Equipment
Aboveground Storage Tank Equipment
Narrow Your Results
Mfr / Trade Name
Category - Main
Manholes & Spill Containers
Caps & Adapters
Submersible Pumps, Motors & Leak Detectors
Valves, Drop Tubes & Vents
Type
Composition
Size
Tank Diameter
- List View
- Gallery View
| Page of 2 |
2 Inch Aluminum Hinged Style Fill Cap Female Thread
Item No. 179-0100AC
All aluminum construction
2 Inch Aluminum Hinged Style Fill Cap Male Thread
Item No. 179M-0100AC
All aluminum construction
1-1/2 Inch Open Vent Upward Aluminum
Item No. 23-0044
Installed on the top of vent pipes from underground or aboveground fuel storage tanks always open to the atmosphere to allow any pressure or vacuum in the tank to vent
4 Inch EVR Approved Tank Monitor Cap With 1/2 Inch Threaded Porthole And Cable Connector
Item No. 305XP-1200ACEVR
Used for fill ports and access to leak detection on fuel storage tanks
2 Inch Aluminum Tank Monitor Cap And Brass Adapter Combination Kit With 1/2 Inch Threaded Port Hole And 1/2 Inch Cable Connector
Item No. 305XPA-2400AK
Tank monitor caps and adaptors are installed on tank monitor riser pipes to keep water and debris out while providing a liquid tight opening for the probe wire to pass through. Features Helps to keep water, dirt, and debris from entering the tank Prevents vapors from escaping Lockable with a padlock Easy to engage push-on Large easy-to-grip pull ring makes it fast and easy to remove
Adjustable Functional Element For AG Pumps
Item No. 323-002-5
Repair part for Red Jacket submersible turbines
2 Inch Updraft Vent
Item No. 354-0200AV
Open vent design used on underground and above ground tanks
4 Inch Updraft Vent
Item No. 354-0400AV
Open vent design used on under ground and above ground tanks
4 inch 61SOR Series Dual-Point Non-Vaportight Remote Fill OPV Overfill Prevention Valve For Up To 8 Foot Diameter Tank
Item No. 61SOR-4000
The OPW 61SO Overfill Prevention Valve is a 2-Stage Shut-off Valve designed to prevent the overfill of Underground Storage Tanks by providing a positive shut-off of product delivery. When the liquid level rises to about 95 Percent of tank capacity, the valve automatically slows flow. If the delivery is not stopped and liquid rises to about 98 Percent of tank capacity, the valve closes completely and liquid cannot flow.
4 inch 61SOR Series Dual-Point Remote Fill OPV Overfill Prevention Valve For Up To 8 Foot Diameter Tank
Item No. 61SOR-400C
The OPW 61SO Overfill Prevention Valve is a 2-Stage Shut-off Valve designed to prevent the overfill of Underground Storage Tanks by providing a positive shut-off of product delivery. When the liquid level rises to about 95 Percent of tank capacity, the valve automatically slows flow. If the delivery is not stopped and liquid rises to about 98 Percent of tank capacity, the valve closes completely and liquid cannot flow.
4 Inch Aluminum Tank Monitor Cap And Adapter 1/2 Inch Grommet
Item No. 62M-0500
The 62M Monitoring Probe & Adapter Kit includes a 4 inch side-sealing Adapter 4 inch side-sealing cap (tapped) and a 1/2 inch wire grommet to secure the cable from an electronic tank gauge probe in the tank riser pipe
2 Inch Upward V Vent Polyethylene
Item No. A4103-002
Slip-on style attaches to 1.5 inch-2.0 inch pipe with 3 set screws
Adjustable Functional Element For Non Ag Pumps
Item No. 323-001-5
Repair part for Red Jacket submersible turbines
2 Inch Open Vent Upward Aluminum
Item No. 23-0033
Installed on the top of vent pipes from underground or aboveground fuel storage tanks always open to the atmosphere to allow any pressure or vacuum in the tank to vent
3 Inch Open Vent Upward Aluminum
Item No. 23-0055
Installed on the top of vent pipes from underground or aboveground fuel storage tanks always open to the atmosphere to allow any pressure or vacuum in the tank to vent
Standard Control Box With 115 Volt AC Coil For 1/3 HP, 3/4 HP, 1-1/2 HP, And 2 HP Motors
Item No. 880-041-5
For opening all standard 3/4 inch and 2 inch drum closures and plugs
2 Inch Male NPT Powder Coated Black Cast Iron Hinged-Style Fill Cap
Item No. 179MCI-0100AC
Cast-iron construction
4 Inch Aluminum Tank Monitor Cap And Brass Adapter Combination Kit With 1/2 Inch Threaded Port Hole And 1/2 Inch Cable Connector
Item No. 305XPA-1200AK
Tank monitor caps and adaptors are installed on tank monitor riser pipes to keep water and debris out while providing a liquid tight opening for the probe wire to pass through. Features Helps to keep water, dirt, and debris from entering the tank Prevents vapors from escaping Lockable with a padlock Easy to engage push-on Large easy-to-grip pull ring makes it fast and easy to remove
