Underground Storage Tank Equipment
Commercial & Industrial Equipment
Narrow Your Results
Mfr / Trade Name
Category - Main
Carbon Canister Vapor Polisher
Manholes & Spill Containers
Caps & Adapters
Containment Sumps, Monitoring Wells & Flex Connectors
Valves, Drop Tubes & Vents
Accessory
Decals
Type
Composition
Size
Skirt Length
Fuel Type
Length
Inlet
Color
- List View
- Gallery View
| Page of 4 |
12 Inch 104 Series Round Bolt-Down Watertight Cast Iron Manhole With Cast Iron Ring and 11-1/4 Inch Tall Galvanized Steel Skirt
Item No. 104A-1200WT
The OPW 104 Series Cast Iron Manhole is a multi-purpose manhole used to provide access to underground service station equipment, commercial equipment, and industrial equipment. A heavily ribbed cast iron cover and body ring ensure maximum load bearing capacity. Features Full-size internal diameter for maximum access and working area. Highway 20 Rated (H20). Rugged cast iron cover and body ring. Cast-in non-skid finish on cover. Sturdy, extra long steel skirt.
12 Inch 104FG Series Round Lay-In Cast Iron Finger Grip Manhole With Cast Iron Ring and 11-1/4 Inch Tall Galvanized Steel Skirt
Item No. 104FG-1200
The OPW 104FG Series Cast Iron Finger Grip Manhole is a multi-purpose manhole used to provide access to underground service station equipment, commercial equipment, and industrial equipment. A heavily ribbed cast iron cover and body ring ensure maximum load bearing capacity and provides a convenient finger grip feature on the cover facilitate cover removal. Features Full-size internal diameter for maximum access and working area. Highway 20 Rated (H20). Rugged cast iron cover and body ring. Cast-in non-skid finish on cover. Sturdy, extra long steel skirt.
2 Inch Female NPT Replacement Shear Top For Single-Poppet 10RF-2001 Valve
Item No. 10RFT-5742
2 Inch Male NPT 10 Series Double-Poppet Emergency Shut-Off Shear Valve
Item No. 10RMP-2004
2 Inch Angle Check Valve - Single Poppet Spring Loaded
Item No. 137-0300AV
Fitted with a light spring & soft seat made for standard check valve applications
2 Inch Pressure Relief Nipple Check Valve Bronze Viton Seats
Item No. 212VPR-20-3650
Mounted in fuel lines at the submersible pump to hold the prime and prevent premature tripping of mechanical leak detectors
2 Inch Full Port 2-Way Brass Ball Valve
Item No. 21BV-0200
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
2 Inch Swing Check Valve - Threaded Brass
Item No. 246A-0200AV
Designed to prevent backflow in horizontal piping systems. Swing check valve allow liquid to flow in a single direction
2 Inch Swing Check Valve - Threaded Brass With Thermal Expansion Relief At 25 Psi
Item No. 246A-0600AV
Designed to prevent backflow in horizontal piping systems. Swing check valve allow liquid to flow in a single direction
2 Inch Threaded Ductile Iron Swing Check Valve
Item No. 246ADI-0500AV
Designed to prevent backflow in horizontal piping systems. Swing check valve allow liquid to flow in a single direction
1-1/2 Inch Female NPT x 3-1/2 Inch Shorty Offset Adapter
Item No. 303-1535
Compensates for misalignment of dispenser suction stub and dispenser boxes.
2 Inch Tank Monitoring Cap With Port Hole & Cable Connector 3/8 Inch
Item No. 305XP-2200AC
2 Inch Tank Monitoring Cap With Port Hole & Cable Connector 1/2 Inch
Item No. 305XP-2400AC
Used for fill ports and access to leak detection on fuel storage tanks
2 Inch Tank Monitor Cap & Adapter With 3/8 Inch Threaded Porthole And Cable Connector
Item No. 305XPA-2200AK
Combination cap and Adapter kit for leak detection systems
2 Inch Tank Monitor Cap & Adapter With 1/2 Inch Port & Cable Connector
Item No. 305XPA-2400AK
Keeps water dirt and debris out of the tank prevents vapors from escaping
2 Inch Single Poppet Foot Valve
Item No. 334-0400AV
Installed at the inlet of a suction line bottom of the storage tank
2 Inch Double Poppet Foot Valve
Item No. 335A-0200AV
Installed at the inlet of a suction line normally at the bottom of the storage tank as a prime holding valve.
2 Inch Updraft Vent
Item No. 354-0200AV
Open vent design used on underground and above ground tanks
2 Inch Slip-On Adapter For Series 523 Vents
Item No. 523SA-1002
Converts a 523V and 623V vent to a 2 inch slip on vent
2 Inch Nipple Check Valve With 25 Psi Expansion Relief
Item No. 530-0100AV
One way check valve used to prevent backflow
2 Inch X 6-1/8 Inch Ball Float Vent Valve
Item No. 53VML-0060
Ball bloat vent valves protrude into underground storage tanks from extractor fittings at the Stage I vapor return riser pipe or tank vent line during a product delivery as the tank level rises a counterweight stainless steel ball seats on the valve body and restricts flow of vapors back to the transport truck
