1-1/2 Inch Male
Underground Storage Tank Equipment
Narrow Your Results
Mfr / Trade Name
Category - Main
Caps & Adapters
Containment Sumps, Monitoring Wells & Flex Connectors
Valves, Drop Tubes & Vents
Accessory
Enviromental & Safety
Type
Composition
Size
Fuel Type
Length
Inlet
Color
- List View
- Gallery View
Page of 2 |
3 Inch CARB EVR Orange Vapor Recovery Adapter Cap ( E85 Approved)
Item No. 1711T-7085-EVR
For use with 1611AV 61VSA 1611AVB and 1611VR Adapters
3 Inch Orange Flat Top Cap Vapor Recovery Low Profile
Item No. 0613VC-30
Cam action handle
3-1/2 Inch Id X 30 Inch Long Flex Containment Boot
Item No. 1001
Clamped directly to 3 inch secondary pipe used over 2 inch primary pipe
4 Inch X 2-1/2 Inch Tall Riser Pipe Extension Short
Item No. 1002S-40
For use on all Adapters
1-1/2 Inch NPT Male 10 Series Single-Poppet Emergency Shut-Off Shear Valve
Item No. 10BM-5825
Installed on fuel supply lines beneath dispenser at grade level
2-3/4 Inch Wide x 10 Inch Long 8 Ounce Capacity Bacon Bomb Fuel Sampler (4849)
Item No. 14209A-EA
Used to obtain samples from storage tanks tank cars and drums. Made of brass and bronze and constructed with a heavy nickel plating and is anti-magnetic.
3 Inch Cap Vapor Recovery Low Profile (E85 Approved)
Item No. 1711LPC-0300
When engaged the locking cap adds only 1/2 inch to the final height of Adapter
3 Inch Full Port Two-Way Ball Valve
Item No. 21BV-0300
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
3 Inch Slip-On Adapter For Series 523 Vents
Item No. 523SA-1003
Converts a 523V and 623V ent to a 3 inch slip on vent
3 Inch X 5 Inch Ball Float Vent Valve
Item No. 53VML-3050
Ball bloat vent valves protrude into underground storage tanks from extractor fittings at the Stage I vapor return riser pipe or tank vent line during a product delivery as the tank level rises a counterweight stainless steel ball seats on the valve body and restricts flow of vapors back to the transport truck
3 Inch X 8 Inch Ball Float Vent Valve
Item No. 53VML-3080
Ball bloat vent valves protrude into underground storage tanks from extractor fittings at the Stage I vapor return riser pipe or tank vent line during a product delivery as the tank level rises a counterweight stainless steel ball seats on the valve body and restricts flow of vapors back to the transport truck
3 Inch X 12 Inch Ball Float Vent Valve
Item No. 53VML-3120
Ball bloat vent valves protrude into underground storage tanks from extractor fittings at the Stage I vapor return riser pipe or tank vent line during a product delivery as the tank level rises a counterweight stainless steel ball seats on the valve body and restricts flow of vapors back to the transport truck
3 Inch X 16 Inch Ball Float Vent Valve
Item No. 53VML-3160
Ball bloat vent valves protrude into underground storage tanks from extractor fittings at the Stage I vapor return riser pipe or tank vent line during a product delivery as the tank level rises a counterweight stainless steel ball seats on the valve body and restricts flow of vapors back to the transport truck
3 Inch X 3 Inch Bronze Fill Pipe Adapter
Item No. 633T-8060
Threads onto the 3 Inch fill pipe of underground storage tanks to mate with top-seal delivery 3 inch elbow
3 Inch Duratuff Single Lever Action Top-Seal Cap
Item No. 634TE-7085
Single lever action top seal cap is designed to mate with 3 inch OPW 633T top seal Adapters
3 Inch Carb EVR Certified Pressure Vacuum Vent, 3 Inch Water Column Pressure, 8 Inch Water Column Vacuum, Thread On
Item No. 723V-3203
Factory preset and tested settings
3 Inch Bronze Fill Adapter Cap
Item No. 724-3040
Threads onto the fill pipe by means of internal wrenching lugs. Compatible with Universal 731 and 733 caps. Compatible with E-85
Riser Extension 4 Inch NPT X 4 Inch Diameter X 2-1/2 Inch Installed Height
Item No. A0031-250
Designed to compensate for height variances due to tank settling and heaving
44 Inch Wide x 24 Inch Deep x 31 Inch Tall FlexWorks 1-Piece Polyethylene UDC Under Dispenser Containment Sump With 16 Inch x 42 Inch Frame For Gilbarco Advantage And Tokheim 330B/333B Dispensers
Item No. DS-1642
The DS-1642 Polyethylene Dispenser Sump is designed to be used with these dispensers 48 inch Frame Gilbarco Advantage Series with 21-1/2 inch x 48 inch footprint. Tokheim 330B/333B Series with 17-1/4 inch x 44 inch footprint.
3 Inch x 18 Inch Stainless Steel FLEX-ING Flex Connector With 3 Inch Nickel-Plated Steel Non-Hex Male x 3 Inch Stainless Steel EZ-FIT Hex Female Ends
Item No. FF30X18MXEZF
Flexible connector features stainless steel corrugated fuel contact layers enclosed with high-grade stainless steel braid for aboveground and belowground applications.