Tank Monitor Cap & Adapter
Swivel Fill Adapter
Narrow Your Results
Mfr / Trade Name
Category - Main
Sensor
Caps & Adapters
Type
Composition
- List View
- Gallery View
| Page of 1 |
4 Inch Nickel Plated E85 EVR Approved Fill Swivel Adapter
Item No. 61SALP-MA
The 61SA Swivel Adapter mates with 4 top-seal delivery elbows and features a top section that rotates with hose movement while the bottom section remains securely in place maintaining seal integrity
4 Inch Aluminum Tank Monitor Cap And Adapter 3/8 Inch Grommet
Item No. 62M-0375
The 62M Monitoring Probe & Adapter Kit includes a 4 inch side-sealing Adapter 4 inch side-sealing cap (tapped) and a 3/8 inch wire grommet to secure the cable from an electronic tank gauge probe in the tank riser pipe
4 Inch Aluminum Tank Monitor Cap And Adapter 1/2 Inch Grommet
Item No. 62M-0500
The 62M Monitoring Probe & Adapter Kit includes a 4 inch side-sealing Adapter 4 inch side-sealing cap (tapped) and a 1/2 inch wire grommet to secure the cable from an electronic tank gauge probe in the tank riser pipe
4 Inch Fill Swivel Adapter - Brass
Item No. SWF-100-B
Protects against fuel spills in the event of a piping break
4 Inch Hydrostatic Sensor Vented Locking Riser Cap Installation Kit - Spare Replacement
Item No. TSP-KV4
Cap is compression-fit into a 4 inch riser opening on double wall fiberglass tank resevoir via a lever.
4 Inch Aluminum Tank Monitor Cap And Brass Adapter Combination Kit With 1/2 Inch Threaded Port Hole And 1/2 Inch Cable Connector
Item No. 305XPA-1200AK
Tank monitor caps and adaptors are installed on tank monitor riser pipes to keep water and debris out while providing a liquid tight opening for the probe wire to pass through. Features Helps to keep water, dirt, and debris from entering the tank Prevents vapors from escaping Lockable with a padlock Easy to engage push-on Large easy-to-grip pull ring makes it fast and easy to remove
4 Inch Bronze Swivel Fill Adapter
Item No. 61SALP-1020-EVR
The 61SA Swivel Adapter mates with 4 top-seal delivery elbows and features a top section that rotates with hose movement while the bottom section remains securely in place maintaining seal integrity
4 Inch CARB EVR Approved Aluminum Tank Monitor Cap And Brass Adapter Combination Kit With 1/2 Inch Threaded Port Hole
Item No. 305XPA-1100AKEVR
Tank monitor caps and adaptors are installed on tank monitor riser pipes to keep water and debris out while providing a liquid tight opening for the probe wire to pass through. Features Helps to keep water, dirt, and debris from entering the tank Prevents vapors from escaping Lockable with a padlock Easy to engage push-on Large easy-to-grip pull ring makes it fast and easy to remove
4 Inch Aluminum Tank Monitor Cap And Brass Adapter Combination Kit With 3/8 Inch Threaded Port Hole And 3/8 Inch Cable Connector
Item No. 305XPA-0200AK
Tank monitor caps and adaptors are installed on tank monitor riser pipes to keep water and debris out while providing a liquid tight opening for the probe wire to pass through. Features Helps to keep water, dirt, and debris from entering the tank Prevents vapors from escaping Lockable with a padlock Easy to engage push-on Large easy-to-grip pull ring makes it fast and easy to remove
4 Inch Cam And Groove x 4 Inch Female NPSM Brass Top-Seal Fill Swivel Adapter
Item No. A0030-124S
The Model A0030-124S Swivel Fill Adapter typically installs on the tank fill riser of a Dual-Point Phase I Vapor Recovery system for underground fuel storage tanks. The top of the adapter rotates 360 degrees in either direction during routine fuel deliveries. The base of the adapter is stationary preventing accidental loosening from the tank fill riser thread connection while eliminating potential vapor leaks and damage to the drop tube. The adapter is designed for use with Top-Seal type fill caps.
