Single Point
3/8 Inch Port
Narrow Your Results
Category - Main
Sensor
Caps & Adapters
Flexible Piping
Type
Composition
Size
Length
- List View
- Gallery View
| Page of 1 |
4 Inch Probe Cap With 3/8 Inch Grommet
Item No. 116M-0375
Drilled and tapped to accept 3/8 Inch wire grommet to secure an electronic tang gauge probe in a tank riser pipe
Aluminum 4 Inch Tank Monitor Cap With 3/8 Inch, EVR Approved
Item No. 305XP-0100ACEVR
Aluminum 4 inch threaded port hole 3/8 inch, 2 pound
2 Inch Aluminum Tank Monitor Cap And Brass Adapter Combination Kit With 3/8 Inch Threaded Port Hole And 3/8 Inch Cable Connector
Item No. 305XPA-2200AK
Tank monitor caps and adaptors are installed on tank monitor riser pipes to keep water and debris out while providing a liquid tight opening for the probe wire to pass through. Features Helps to keep water, dirt, and debris from entering the tank Prevents vapors from escaping Lockable with a padlock Easy to engage push-on Large easy-to-grip pull ring makes it fast and easy to remove
4 Inch Aluminum Tank Monitor Cap And Adapter 3/8 Inch Grommet
Item No. 62M-0375
The 62M Monitoring Probe & Adapter Kit includes a 4 inch side-sealing Adapter 4 inch side-sealing cap (tapped) and a 3/8 inch wire grommet to secure the cable from an electronic tank gauge probe in the tank riser pipe
20 Inch Air Test Jumper Hose Kit With (2) Shrader Valve Fittings
Item No. TJ-200A
Used when testing FlexWorks pipe
Single-Point Single-Float Hydrostatic Interstitial Reservoir Sensor With 12 Foot Cable And Vented Riser Cap Assembly For Brine-Filled Doublewall Tanks
Item No. 794380-301
The Single-Point Hydrostatic Reservoir Sensor accurately detects fluid level change in the reservoir and interstice of a double wall storage tank. The Single-Point has one float and can be used in low groundwater locations. With the Single-Point Hydrostatic Sensor if either an inner or outer leak occurs the brine level decreases and a low-level alarm is triggered. If an inner-wall leak occurs, the brine seeps into the tank triggering a fuel alarm, or if the outer wall leaks, the brine seeps out of the tank interstice triggering a fuel alarm. Key Features Clear plastic housing for visual inspection or float operations Leak in inner or outer wall triggers a low level alarm in low groundwater areas Meets California&rsquos requirement for secondary space monitoring for tanks as required by AB 2481
4 Inch EVR Approved Aluminum Tank Monitor Cap With 3/8 Inch Threaded Port Hole And 3/8 Inch Cable Connector
Item No. 305XP-0200ACEVR
Tank monitor caps are installed on tank monitor riser pipe adapters to keep water and debris out while providing a liquid tight opening for the probe wire to pass through.
2 Inch CARB EVR Approved Aluminum Tank Monitor Cap And Brass Adapter Combination Kit With 3/8 Inch Threaded Port Hole And 3/8 Inch Cable Connector
Item No. 305XPA-2200AKEVR
Tank monitor caps and adaptors are installed on tank monitor riser pipes to keep water and debris out while providing a liquid tight opening for the probe wire to pass through. Features Helps to keep water, dirt, and debris from entering the tank Prevents vapors from escaping Lockable with a padlock Easy to engage push-on Large easy-to-grip pull ring makes it fast and easy to remove
4 Inch Aluminum Tank Monitor Cap And Brass Adapter Combination Kit With 3/8 Inch Threaded Port Hole And 3/8 Inch Cable Connector
Item No. 305XPA-0200AK
Tank monitor caps and adaptors are installed on tank monitor riser pipes to keep water and debris out while providing a liquid tight opening for the probe wire to pass through. Features Helps to keep water, dirt, and debris from entering the tank Prevents vapors from escaping Lockable with a padlock Easy to engage push-on Large easy-to-grip pull ring makes it fast and easy to remove
