RDM Electronics
PMP
Narrow Your Results
Mfr / Trade Name
Category - Main
Dispenser Maintenance
Dispenser Replacement Parts
- List View
- Gallery View
| Page of 1 |
101 4-Wheel Non-Computer Wheels In Top Position 4:1 Input Ratio Configured For Tokheim Electric Reset
Item No. 13005-5
Core Charge Incurred At Check Out
Rebuilt Gilbarco Advantage Meter For Dispenser A Side
Item No. 22008
Core Charge Incurred At Check Out Discharge port is 90 Degrees to the calibration dial
Rebuilt Gilbarco Advantage Digital Valve (T20013-G1)
Item No. 22080
Core Charge Incurred At Check Out
Gilbarco Encore Proportional Valve (M02227A001/M02227A002/M02227K001)
Item No. 22082
Core Charge Incurred At Check Out
Rebuilt M/2Pm6K Electronic Drive Meter
Item No. 26003
Core Charge Incurred At Check Out Repair part for Red Jacket Standard submersible turbines
Rebuilt Wayne Flat-Inlet 2-Sided Imeter
Item No. 26034
Core Charge Incurred At Check Out Flat faced inlet flange
Rebuilt Pmp Wayne Imeter Proportional Valve 5 Screw Threaded Stem 3 Vista And Ovation
Item No. 26076
Core Charge Incurred At Check Out Threaded stem 3 Vista and Ovation
Wayne Ovation/3V Imeter Proportional Valve With 4-Screw Cover
Item No. 26077
Core Charge Incurred At Check Out
Tokheim 77 Electric Reset 6-Pin Plug 2 Wire Unlighted
Item No. 38006-6
Core Charge Incurred At Check Out
Rebuilt Gilbarco Vapor Vac Motor (R19663-G1RB)
Item No. 51200
Core Charge Incurred At Check Out
Rebuilt Wayne Vac Motor Assembly (002-300341-0RB)
Item No. 51290
Core Charge Incurred At Check Out
Rebuilt Wayne Ovation Clamshell Printer (889022-R02)
Item No. 68611
Core Charge Incurred At Check Out
Rebuilt Ovation 5-Product PPU Display With Fluorescent Back Light (892136-R02-8102)
Item No. 8102R
Core Charge Incurred At Check Out
3/4 Inch ID x 1-1/8 Inch OD Conventional Hose Clamp
Item No. BP-1394
Fits 1-1/8 inch outer diameter
3/4 Inch ID x 1-1/8 Inch OD Conventional Hose Clamp With White Insert
Item No. BP-1396-290
Fits 1-1/8 inch outer diameter
Gas Pump Meter Seal Crimping Tool With (2) Pre-Installed Dies **Must Specify Die Stamp Characters**
Item No. BP-1469
- Each die is secured by a set screw. The set screw requires a hex key.
Lead Seal With 12 Inch Wire
Item No. BP-1468-12
Lightweight lead for easy crimping / marking
Lead Seal With 18 Inch Wire
Item No. BP-1468-18
Lightweight lead for easy crimping / marking
