Adhesive
Piping
Narrow Your Results
Mfr / Trade Name
Category - Main
Type
Length
- List View
- Gallery View
Page of 1 |
24 Inch Air Test Jumper Hose Kit With (2) Shrader Valve Fittings
Item No. 00002728
Proven reliable fiberglass pipe system
Filler For 8014 Adhesive
Item No. 002990-004-0
Thickening agent to increase viscosity of 8069 Adhesive.
PSX-20 Adhesive Filler Kit
Item No. 002990-033-0
Thickening agent to increase viscosity of PSX Adhesive.
4 Inch Bonded Sump Entry Termination Fitting
Item No. 012040-626-0
UL971 listed and also available in 3 inch
Model 3000Lcx Taper/Scarfing Power Tool For 2 And 3 Inch Ameron Dualoy 3000/L And 3000/Lcx
Item No. 24328701
Tapers and scars 2 and 3 inch LCX pipe. Tapers 2 and 3 inch 3000/L pipe.
2 Inch - 4 Inch 120 Volt Electric Heating Blanket
Item No. 24410400
Heat blankets are designed to heat-cure adhesive joints in dualoy pipe and fittings.
Universal Jacket Cutter For 2 3 And 4 Inch Ameron Dualoy 3000/Lcx
Item No. 25158701
Quickly removes secondary containment layer from 2, 3, and 4 inch LCX pipe.
6 Ounce PSX-20 Adhesive Kit - Single
Item No. 60210101
PSX-20 is a two-component epoxy typically used for bonding Primary FRP pipe and fittings.
FF Series Double-Sided FRP Flange Pass-Through Entry Fitting For 3/4 Inch Galvanized Conduit On Flat-Wall Singlewall FRP Sump - (1) EP100 Required
Item No. F-07-F
- UL2447 listed. 30-year corrosion warranty.
Retrofit S Series FRP Split Retrofit Entry Fitting With 7 Inch Flange For 3 Inch FRP Pipe On Flat Or Round-Wall Singlewall FRP Sump - (2) EP100RF Required
Item No. RF-30-01-U
Used for internal one-sided repairs to eliminate continuous leak points caused by degraded flexible entry boots in singlewall sumps.
1 Inch - 2 Inch 115 Volt Electric Heating Blanket
Item No. 005990-520-0
Supercedes 005990-502-0
3 Inch Bonded Sump Entry Termination Fitting
Item No. 012030-626-0
UL971 listed and also available in 4 inch
6 Ounce PSX-34 Adhesive Kit - Single
Item No. 60120101
- Can only be shipped via UPS by approved Hazmat shipping facilities. Extra handling fees may apply to shipping via any freight carrier.
7 Ounce Standard Epoxy Kit
Item No. EP100
Can only be shipped via UPS by approved Hazmat shipping facilities. Extra handling fees may apply to shipping via any freight carrier.
FF Series Double-Sided FRP Flange Pass-Through Entry Fitting For 2 Inch LCX Pipe On Flat-Wall Singlewall FRP Sump - (1) EP100 Required
Item No. F-20L-F
Bonded FRP Flange by Flange entry fitting for singlewall sumps for long service life.
FF Series Double-Sided FRP Flange Pass-Through Entry Fitting For 3/4 Inch Robroy PVC-Coated Conduit On Flat-Wall Singlewall FRP Sump - (1) EP100 Required
Item No. F-07R-F
- UL2447 listed. 30-year corrosion warranty.
7 Ounce Retrofit Epoxy Kit
Item No. EP100RF
Can only be shipped via UPS by approved Hazmat shipping facilities. Extra handling fees may apply to shipping via any freight carrier.
Retrofit-S Series Single-Sided FRP Split Retrofit Fitting With 5 inch Flange For 3/4 Inch Conduit On Flat Or Round-Wall Singlewall FRP Sump - (1) EP100RF Required
Item No. RF-07-01-U
Used for internal one-sided repairs to eliminate continuous leak points caused by degraded flexible entry boots in singlewall sumps.
F Series Full-Body Taper-By-Slip Pass-Through FRP Entry Fitting With Dual Test Ports And Single Injection Port For 3 x 2 Inch FRP Pipe On Flat-Wall Single Or Doublewall Sump - (2) EP100 Required
Item No. F-32S-T-F
Bonded FRP new construction full-body termination entry fitting for singlewall or doublewall sumps.
4 Inch x 5 Foot Riser Pipe Kit With (2) Bell x Male Adapters And (1) Adhesive Kit
Item No. 98C02373
Kit includes (1) 012040-060-0 4 Inch x 5 Foot Red Thread IIA FRP Riser Pipe UL-971 Listed, (2) 012040-191-9 4 Inch Red Thread IIA FRP Riser Pipe Adapter Bell x Male NPT, (1) 60210101 6 Ounce PSX-20 Adhesive Kit