Tank Bottom Protector
Overfill Valves
Narrow Your Results
Mfr / Trade Name
Valves, Drop Tubes & Vents
Type
Composition
Size
Tank Diameter
Tank Opening
Bury Depth
Length
Inlet
- List View
- Gallery View
| Page of 3 |
2 Inch Overfill Prevention Valve Aluminum Body With 3 Inch Female Threads X 4 Inch Female Threads EVR Approved
Item No. 9095AA4200AVEVR
Installed at the fill port of an aboveground storage tank
2 Inch Carb EVR Approved AST Overfill Prevention Valve With 2 Inch Dry Disconnect Adapter x 4 Inch Female NPT
Item No. 9095AA5200AVEVR
Installed at the fill port of an aboveground storage tank
Swivel Wrench For 61SA Fill And 61VSA Vapor Adaptors
Item No. 61SA-TOOL
The 61SA-TOOL is a wrench designed to thread on the 61SA Fill and 61VSA vapor Adapters. The OPW 61SA-TOOL Adapter installation tool is required to insure proper installation of OPW rotatable swivel Adapters thread-on spill containers fill and vapor Adapters TC-400 torque cap for pipe nipples and threaded riser Adapters as per EVR requirements. The 61SA-TOOL includes provisions for the use of a torque wrench to facilitate accurate installation and testing
Defender Series CARB Approved Overfill Prevention Valve With 5 Foot Top Drop Tube And 8 Foot Bottom Drop Tube
Item No. 708691901
Magnetically-coupled actuator system provides positive shutoff at a broad range of flow rates and eliminates any pentetrations in the valve making it both vapor and leak tight.
Defender Series CARB Approved Overfill Prevention Valve With 10 Foot Top Drop Tube And 8 Foot Bottom Drop Tube
Item No. 708692901
Magnetically-coupled actuator system provides positive shutoff at a broad range of flow rates and eliminates any pentetrations in the valve making it both vapor and leak tight.
Defender Series CARB Approved Overfill Prevention Valve With 10 Foot Top Drop Tube And 10 Foot Bottom Drop Tube
Item No. 708692902
Magnetically-coupled actuator system provides positive shutoff at a broad range of flow rates and eliminates any pentetrations in the valve making it both vapor and leak tight.
1-1/2 Inch And 2 Inch Extractor Wrench Tool
Item No. 89-0044
The OPW 89 Extractor Wrench is designed to install or remove OPW 53VML and 30MV Ball Float Vent Valves or OPW 233VP and 233VMP Test Plugs in OPW 233, 233V, and 233VM Extractor Fittings
