Open
iX Pay SPM 2.5
Narrow Your Results
Mfr / Trade Name
Category - Main
Dispenser Replacement Parts
Submersible Pumps, Motors & Leak Detectors
Valves, Drop Tubes & Vents
Type
Size
- List View
- Gallery View
| Page of 1 |
1-1/2 Inch Open Vent Upward Aluminum
Item No. 23-0044
Installed on the top of vent pipes from underground or aboveground fuel storage tanks always open to the atmosphere to allow any pressure or vacuum in the tank to vent
2 Inch Updraft Vent
Item No. 354-0200AV
Open vent design used on underground and above ground tanks
4 Inch Updraft Vent
Item No. 354-0400AV
Open vent design used on under ground and above ground tanks
TPGC-220 Guardian Series 3-Phase Submersible Pump Smart Controller (220 Volt Supply / 110 Volt Hook)
Item No. 5800103220
Features Compatible with most FE PETRO three phase 3 Hp and 5 Hp fixed speed STPs, as well as comparable competitive STPs. 3-1/2 inch digital LCD provides readable running and fault status for quick troubleshooting. Separate Reset and Silence/Calibrate push buttons provide clear interaction with the controller. Automatically logs the last five abnormal conditions seen in the pumping system. This data is retained in non-volatile memory. Service technicians can quickly view a history of abnormal conditions, which is particularly useful when troubleshooting intermittent conditions. Over voltage protection and enhanced underload detection protects pumping system equipment. With a single press of the Calibrate button, the controller will automatically learn the electrical characteristics of the STP for easy setup or retrofit.
2 Inch Upward V Vent Polyethylene
Item No. A4103-002
Slip-on style attaches to 1.5 inch-2.0 inch pipe with 3 set screws
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: ConocoPhillips Heartland 3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-080
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: Thornton Oil 1DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-156
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: Chevron 3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-188
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: ExxonMobil 3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-225
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: ConocoPhillips Heartland 3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-226
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: Speedway/SuperAmerica 1DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-248
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: Sunoco Fiserv Dual 1DES/3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-289
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: Generic Fiserv Wells NA TD-351 3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-463
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: Generic Heartland Small Merchant 3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-468
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: Valero Fiserv TD-346Â 3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-480
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: Marathon Heartland 3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-482
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: Shell Fiserv Dual 1DES/3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-488
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: BP Fiserv TD-246 Dual 1DES/3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-491
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Injected Keypad Assembly: CITGO Heartland Dual 1DES/3DES - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-492
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
iX Pay SPM 2.5 EMV US Keypad Assembly: Wayne Standard/Blank - (1) Gasket and (1) VGA Backlight Cable Rev. 02 Required
Item No. W2894472-002-700
The iXPay SPM 2.5 keypad is designed to meet the PCI6 security standard. iX Pay SPM 2.5 (W2894472-002-xxx) supersedes the SPM1 keypad (892638-006-xxx/892638-106-xxx) as a direct replacement in Wayne iX Pay Security Payment Platform (iXPay1) and Wayne iDPOS solutions.
2 Inch Open Vent Upward Aluminum
Item No. 23-0033
Installed on the top of vent pipes from underground or aboveground fuel storage tanks always open to the atmosphere to allow any pressure or vacuum in the tank to vent
3 Inch Open Vent Upward Aluminum
Item No. 23-0055
Installed on the top of vent pipes from underground or aboveground fuel storage tanks always open to the atmosphere to allow any pressure or vacuum in the tank to vent
3 Inch Updraft Vent Cap
Item No. 354-0300AV
Open vent design used on under ground and above ground tanks
