Veeder Root
OPW Fueling Components
Narrow Your Results
Mfr / Trade Name
Category - Main
Replacement Parts & Spare Modules
Hanging Hardware
Manholes & Spill Containers
Caps & Adapters
Containment Sumps, Monitoring Wells & Flex Connectors
Composition
Size
Fuel Type
Length
Inlet
Color
- List View
- Gallery View
Jack Screw Kit For Composite Base
Item No. 61JSK-4410
Allows liquid in the spill containment to drain directly into the drop tube
Jack Screw Kit For Cast Iron Base
Item No. 61JSK-44CB
Allows liquid in the spill containment to drain directly into the drop tube
Vapor Assist Dual Poppet Reconnectable Breakaway
Item No. 66CAS-0300
Dual poppets - closes to prevent product spillage and vapor leakage
1 Inch Swivel Breakaway Connector
Item No. 66SB-1010
66SB will break away with a pull force of no more than 350 lbs
3/4 Inch Female NPT Aluminum Single-Use Breakaway UL Listed For Gasoline, Diesel, And Up To E85
Item No. 66V-0492
The 66V will pull apart at less than the 300 PSI pull force during drive-offs and is designed for single-use to protect agaisnt reassembly.
1 Inch EZR Series Reconnectable Breakaway
Item No. 68EZR-1010
Easily reconnected Push-Twist-Click technology.
1 Inch Reconnectable Breakaway For Diesel And Biodiesel Up To B20
Item No. 68EZR-10RF
- Ul and ULC Listed
3/4 Inch Conventional Reconnectable Breakaway
Item No. 68EZR-7575
Easily reconnected- features Push-Twist-Click technology. Cold weather compatible. 250lb pull force
3/4 Inch NPT x 3/4 Inch NPT Swivel Breakaway
Item No. 68EZSB-7575
The OPW 68EZSB Swivel Breakaway is intended for easy installation at the nozzle inlet. The compact, lightweight design incorporates a full 360 degree swivel rotation at both the male end and middle joint, with a simple and easily reconnectable breakaway on the opposite end. The single-unit design replaces the standard swivel, breakaway and whip hose to minimize possible leak points.
7H Series Yellow Diesel/B5 Automatic Truck Nozzle With 1 Inch NPT Inlet 1-Piece Hand Insulator Fillgard Splash Guard And Aluminum Spout With Spout Ring Without Hold-Open Rack. UL 2586 Listed.
Item No. 7H-0900
For Heavy-Duty High-Flow Truck Bus and Fleet Service. Even smooth spray pattern minimizes diesel foaming and false shut-offs.
7H Series Green Diesel/B5 Automatic Truck Nozzle With 1 Inch NPT Inlet 1-Piece Hand Insulator Fillgard Splash Guard And Aluminum Spout Without Spout Ring Or Hold-Open Rack. UL 2586 Listed.
Item No. 7H-5100
For Heavy-Duty High-Flow Truck Bus and Fleet Service. Even smooth spray pattern minimizes diesel foaming and false shut-offs.
33 Inch Fiberglass (Frp) Cover With (2) 5-Gallon Water Shroud Boots And Clamps
Item No. MPWS-33
Designed to completely isolate surface water and condensation from tank sump
36 Inch FRP Fiberglass Cover With (2) 5-Gallon Water Shroud Boots And Clamps
Item No. MPWS-36
Designed to completely isolate surface water and condensation from tank sump
3 Inch X 3 Inch Poppeted Vapor Recovery Adapter (3 Inch Riser)
Item No. 1611AV-1605
Designed to mate with a delivery tank truck vapor recovery elbow
3 Inch X 4 Inch Vapor Recovery Adapter For 4 Inch Riser
Item No. 1611AV-1620
Poppeted Adapter designed to mate with vapor recovery elbow
7H Series Green Diesel/B5 Automatic Truck Nozzle With 1 Inch NPT Inlet 1-Piece Hand Insulator Fillgard Splash Guard And Aluminum Spout With Spout Ring Without Hold-Open Rack. UL 2586 Listed.
Item No. 7H-0100
For Heavy-Duty High-Flow Truck Bus and Fleet Service. Even smooth spray pattern minimizes diesel foaming and false shut-offs.
11AP Series Red E10 Unleaded Automatic Nozzle With 3/4 Inch NPT Inlet 2-Piece Hand Insulator And Aluminum Spout Without Hold-Open Rack. UL 2586 Listed.
Item No. 11AP-0300
Flow-Lock allows nozzle to shut-off when falling out of a vehicle and is tipped up limiting spillage and unsafe conditions.
4 Inch TLS Mag Plus Gasoline Tank Probe Float Kit With 5 Foot Cable
Item No. 330020-720
Proven float technology system that meets specified fluid materials for precise in-tank inventory and optional water measurements.
