OPW Fueling Components
Emco Wheaton Retail
Narrow Your Results
Mfr / Trade Name
Valves, Drop Tubes & Vents
Type
Size
- List View
- Gallery View
Page of 1 |
![Overfill Prevention Valve Drill Fixture Tool A1100 Overfill Prevention Valve Drill Fixture Tool A1100](https://shop.sourcena.com/lowres/detail/566675.jpg)
Overfill Prevention Valve Drill Fixture Tool A1100
Item No. 566675
Aligns holes for drilling to ensure vapor-tight seal
![1-1/2 Inch Vertical Check Valve With Shear Groove (E85) 1-1/2 Inch Vertical Check Valve With Shear Groove (E85)](https://shop.sourcena.com/lowres/detail/70-0070.jpg)
1-1/2 Inch Vertical Check Valve With Shear Groove (E85)
Item No. 70-0070
OPW Vertical Check Valves are installed the inlet to the pump in the dispenser island to maintain prime
![1-1/2 Inch Vertical Check Valve With Test Port And Shear Groove Boss Mount (E85) 1-1/2 Inch Vertical Check Valve With Test Port And Shear Groove Boss Mount (E85)](https://shop.sourcena.com/lowres/detail/70S-0075.jpg)
1-1/2 Inch Vertical Check Valve With Test Port And Shear Groove Boss Mount (E85)
Item No. 70S-0075
OPW Vertical Check Valves are installed the inlet to the pump in the dispenser island to maintain prime
![Fill/Vapor Adapter Wrench Fill/Vapor Adapter Wrench](https://shop.sourcena.com/lowres/detail/A0081-001.jpg)
Fill/Vapor Adapter Wrench
Item No. A0081-001
Use to install and remove EMCO Fill and Vapor Adapters with octagonal bases and the 494096 Riser Seal.
![Swivel Wrench For 61SA Fill And 61VSA Vapor Adaptors Swivel Wrench For 61SA Fill And 61VSA Vapor Adaptors](https://shop.sourcena.com/lowres/detail/61SA-TOOL.jpg)
Swivel Wrench For 61SA Fill And 61VSA Vapor Adaptors
Item No. 61SA-TOOL
The 61SA-TOOL is a wrench designed to thread on the 61SA Fill and 61VSA vapor Adapters. The OPW 61SA-TOOL Adapter installation tool is required to insure proper installation of OPW rotatable swivel Adapters thread-on spill containers fill and vapor Adapters TC-400 torque cap for pipe nipples and threaded riser Adapters as per EVR requirements. The 61SA-TOOL includes provisions for the use of a torque wrench to facilitate accurate installation and testing
![1-1/2 Inch And 2 Inch Extractor Wrench Tool 1-1/2 Inch And 2 Inch Extractor Wrench Tool](https://shop.sourcena.com/lowres/detail/89-0044.jpg)
1-1/2 Inch And 2 Inch Extractor Wrench Tool
Item No. 89-0044
The OPW 89 Extractor Wrench is designed to install or remove OPW 53VML and 30MV Ball Float Vent Valves or OPW 233VP and 233VMP Test Plugs in OPW 233, 233V, and 233VM Extractor Fittings