OPW Fueling Components
Petroleum Containment

  • List View
  • Gallery View
Sort By:
Results/Page:
Page
of 1
Quick Info
14C Series Green B20 Diesel Capture Technology Nozzle With 3/4 Inch Inlet  2-Piece Hand Insulator  Aluminum Spout   And Hold-Open Rack. UL/ULC Listed.

14C Series Green B20 Diesel Capture Technology Nozzle With 3/4 Inch Inlet 2-Piece Hand Insulator Aluminum Spout And Hold-Open Rack. UL/ULC Listed.

Diesel Fuel Capture Technology and Drip Gaurd allow excess fuel to drain back into the fuel stream and provied cleaner greener fueling

Quick Info
14E Series Black ECO Enhanced Dripless Conventional E10 Unleaded Gasoline Nozzle With Interlock  3/4 Inch Inlet  2-Piece Hand Insulator  Aluminum Spout With Stainless Tip/Teflon-Coated Inside  And Hold-Open Rack. UL/ULC Listed And CARB Certified.

14E Series Black ECO Enhanced Dripless Conventional E10 Unleaded Gasoline Nozzle With Interlock 3/4 Inch Inlet 2-Piece Hand Insulator Aluminum Spout With Stainless Tip/Teflon-Coated Inside And Hold-Open Rack. UL/ULC Listed And CARB Certified.

Patented dripless free-draining spout to catch liquid designed to exceed CARB dripless requirements. Enhanced Drip control prevents fuel from flowing unless the nozzle is fully inserted in vehicle.

Quick Info
3/4 Inch Male NPT x 3/4 Inch Female NPT E25/B20 2-Plane Swivel

3/4 Inch Male NPT x 3/4 Inch Female NPT E25/B20 2-Plane Swivel

UL Listed for up to 25% Ethanol and 20% Biodiesel.

Quick Info
3/4 Inch x 250 Foot Box FlexWorks Doublewall Flexible Primary Pipe UL 971 Listed

3/4 Inch x 250 Foot Box FlexWorks Doublewall Flexible Primary Pipe UL 971 Listed

3/4 Inch I.D. x 1.18 Inch O.D. next-generation FlexWorks pipe features increased flexibility reduced memory and reduced weight for ease of installation.

Quick Info
3/4 Inch x 500 Foot Box FlexWorks Doublewall Flexible Primary Pipe UL 971 Listed

3/4 Inch x 500 Foot Box FlexWorks Doublewall Flexible Primary Pipe UL 971 Listed

3/4 Inch I.D. x 1.18 Inch O.D. next-generation FlexWorks pipe features increased flexibility reduced memory and reduced weight for ease of installation.

Quick Info
FRP Series Full Ring Pass-Thru FRP Entry Fitting For 3/4 Inch Galvanized Conduit On Flat-Wall Sump *EP2A Or ADH-300G Adhesive Required*

FRP Series Full Ring Pass-Thru FRP Entry Fitting For 3/4 Inch Galvanized Conduit On Flat-Wall Sump *EP2A Or ADH-300G Adhesive Required*

The Full Ring Pass-Thru FRP New Construction Entry Fitting has a small profile and occupies little space in a crowded sump. Features 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Small profile saves space in sump. Works with angled pipe entries up to 10&deg for job site adaptability allowing room for misalignment Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings

Quick Info
SRB Series Split Repair FRP Entry Fitting With Stainless Band Clamp For 3/4 Inch Galvanized Conduit On Flat-Wall Sump *EP2A Or ADH-300G Adhesive Required*

SRB Series Split Repair FRP Entry Fitting With Stainless Band Clamp For 3/4 Inch Galvanized Conduit On Flat-Wall Sump *EP2A Or ADH-300G Adhesive Required*

The Split Repair FRP Entry Fitting With Band Clamp makes repairs straight forward and allows for field modification. Features Stainless Band Clamp holds fitting in place and the Retention Rim prevents the clamp from sliding off the fitting while the epoxy cures Can be modified in the field to simplify service work 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Works with angled pipe entries up to 10&deg for job site adaptability allowing room for misalignment Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings

Quick Info
SRB Series Oversize Split Repair FRP Entry Fitting With Stainless Band Clamp For 3/4 Inch Galvanized Conduit On Flat Wall Sump *EP2A Or ADH-300G Adhesive Required*

SRB Series Oversize Split Repair FRP Entry Fitting With Stainless Band Clamp For 3/4 Inch Galvanized Conduit On Flat Wall Sump *EP2A Or ADH-300G Adhesive Required*

The Oversized Split Repair FRP Entry Fitting With Band Clamp makes repairs straight forward and allows for field modification. Oversized model eliminates need to pair the SRB with a BSO fitting. Features Stainless Band Clamp holds fitting in place and the Retention Rim prevents the clamp from sliding off the fitting while the epoxy cures Can be modified in the field to simplify service work 100% fiberglass construction provides superior strength and ensures the fitting will withstand long-term exposure to all fuels, including ethanol Works with angled pipe entries up to 10&deg for job site adaptability allowing room for misalignment Cost-effective affordable fiberglass fitting with a similar cost to rubber or plastic fittings

Quick Info
3/4 Inch Unleaded Hanging Hardware Kit With 11BP Black Nozzle Splash Guard Multi-Plane Swivel Reconnectable Breakaway Whip Hose And 8 Foot 6 Inch Standard Hose

3/4 Inch Unleaded Hanging Hardware Kit With 11BP Black Nozzle Splash Guard Multi-Plane Swivel Reconnectable Breakaway Whip Hose And 8 Foot 6 Inch Standard Hose

Includes (1) Black 11BP Unleaded nozzle with splash guard (1) 3/4 inch 45-5060 multiplane swivel (1) 3/4 Inch 68EZR-7575 reconnectable breakaway (1) 3/4 x 9 inch whip hose and (1) 3/4 Inch x 8 foot six inch standard curb hose.

Quick Info
Quick Info
3/4 Inch Test Boot

3/4 Inch Test Boot

With air stem

Displaying: 1 - 11 of 11 results
 
 
 
Go Top