2 Inch Female
OPW Fueling Components
Narrow Your Results
Mfr / Trade Name
Category - Main
Dispenser Replacement Parts
Manholes & Spill Containers
Caps & Adapters
Containment Sumps, Monitoring Wells & Flex Connectors
Valves, Drop Tubes & Vents
Mechanical Tank Gauges
Flexible Piping
Accessory
Type
Composition
Size
Skirt Length
Tank Diameter
Length
Inlet
Color
- List View
- Gallery View
Page of 1 |
3 Inch Orange CARB EVR Vapor Recovery Adapter Cap ( E85 Approved)
Item No. 1711T-7085-EVR
For use with 1611AV 61VSA 1611AVB and 1611VR Adapters
2 Inch Female NPT 10 Series Single-Poppet Emergency Shut-Off Shear Valve
Item No. 10RF-2001
Female National Pipe Thread (NPT) top connection
2 Inch Female NPT 10 Series Double-Poppet Emergency Shut-Off Shear Valve
Item No. 10RFP-2002
Female National Pipe Thread (NPT) top connection
3 Inch Cap Vapor Recovery Low Profile (E85 Approved)
Item No. 1711LPC-0300
When engaged the locking cap adds only 1/2 inch to the final height of Adapter
Ast Mechanical Tank Gauge - Up To 18 Feet
Item No. 200TG-ENG
Designed for reading liquid levels in horizontal or vertical aboveground storage tanks in English foot and inch units
3 Inch Full Port Two-Way Ball Valve
Item No. 21BV-0300
Used throughout fueling systems where a shut-off point is desirable to isolate a section of the piping system
3 Inch Slip-On Adapter For Series 523 Vents
Item No. 523SA-1003
Converts a 523V and 623V ent to a 3 inch slip on vent
3 Inch X 5 Inch Ball Float Vent Valve
Item No. 53VML-3050
Ball bloat vent valves protrude into underground storage tanks from extractor fittings at the Stage I vapor return riser pipe or tank vent line during a product delivery as the tank level rises a counterweight stainless steel ball seats on the valve body and restricts flow of vapors back to the transport truck
3 Inch X 8 Inch Ball Float Vent Valve
Item No. 53VML-3080
Ball bloat vent valves protrude into underground storage tanks from extractor fittings at the Stage I vapor return riser pipe or tank vent line during a product delivery as the tank level rises a counterweight stainless steel ball seats on the valve body and restricts flow of vapors back to the transport truck
MPD Hose Retractor Package Wayne 37 Inch Frame 1 Retractor Does Not Include Hose Clamp
Item No. 6102-DW1037
Packages are shipped complete with appropriate number of retractors and mounting hardware
37 Inch 110 Series Round Lay-In Diamond Plate Steel Manhole With Recessed Handle, Fabricated Steel Ring and 10-3/4 Inch Tall Galvanized Steel Skirt
Item No. 6110-3710
The OPW 110 Series Round Steel Manhole is a multi-purpose manhole used to provide access to underground service station equipment, commercial equipment, and industrial equipment. A diamond plate steel cover and fabricated steel body ring ensure maximum load bearing capacity. Features Easy cover removal with integral recessed handle . Highway 20 Rated (H20). Rugged diamond plate steel cover and fabricated steel body ring.
3 Inch X 3 Inch Bronze Fill Pipe Adapter
Item No. 633T-8060
Threads onto the 3 Inch fill pipe of underground storage tanks to mate with top-seal delivery 3 inch elbow
3 Inch Duratuff Single Lever Action Top-Seal Cap
Item No. 634TE-7085
Single lever action top seal cap is designed to mate with 3 inch OPW 633T top seal Adapters
3 Inch Carb EVR Certified Pressure Vacuum Vent, 3 Inch Water Column Pressure, 8 Inch Water Column Vacuum, Thread On
Item No. 723V-3203
Factory preset and tested settings
3 Inch Entry Boot Fitting For 3 Inch Double Wall Flexworks Or Rigid Pipe
Item No. EBF-0300
For 3 inch DW FlexWorks pipe 3 inch rigid pipe or 3 inch LCX/MCX pipe
3 Inch Open Vent Upward Aluminum
Item No. 23-0055
Installed on the top of vent pipes from underground or aboveground fuel storage tanks always open to the atmosphere to allow any pressure or vacuum in the tank to vent
3 Inch Thread-On 2-1/2 Inch To 6 Inch Water Column Pressure Vacuum Vent
Item No. 623V-3203
Pressure Vacuum Vents are installed on the top of vent pipes from underground or above ground fuel storage tanks
Replacement 3 Inch Nitrile Gasket For 1711T Vapor Recovery Cap
Item No. H10886M
Replacement gasket for 1711T-7085-EVR cap